Side Frame
-
Mack side frame
This side frame is almost identical to frame #6716, with the exception of the full horseshoe flange, and it is 1/2" shorter than #6716.
Learn More -
Mack side frame
Flanges on both ends have 8 holes, 4 tapped 5/16"NC and 4 drilled clearance for 5/16" bolts. Variousother holes for shroud, brackets, etc.
Note: frames are interchangeable. Learn More -
Mack side frame
Flanges on both ends have 8 holes (2 tapped 3/8" NCand 6 drilled clearance for 3/8" bolts). Extra bracket onone side with two 5/16" NC threaded holes.
NOTE: Frames are not interchangeable. Order left fordrivers side or right for passengers side or pairs. Learn More -
Mack side frame
Each flange has 10 holes, four tapped 5/16" NC anddrilled clearance for 5/16" bolts. One angle bracketwith a 3/8" slotted hole 7 3/4" down from end. Oneangle bracket with a 3/8" hole 10 1/4" from end tocenter. Two 5/16" NC holes on back of channel.Five 5/16" NC holes on one side of channel.
Note: frames are not interchangeable. Order left fordrivers side or right for passengers side or pairs. Learn More -
Mack side frame
Top flange is L shaped with 9 holes (6 holes drilledclearance for 5/16" bolts and 3 holes tapped 5/16"NC threads). Bottom flange has 11 holes (8 drilledclearance for 5/16" bolts and 3 holes tapped 5/16"NC threads). Six 5/16" NC threaded holes on eachside. Six 3/8" N.C. threaded holes on the back.
NOTE: Frames are not interchangeable. Order left fordrivers side or right for passengers side or pairs. Learn More -
Mack side frame
Each flange has 14 holes, 4 tapped 5/16" NC and 10drilled clearance for 5/16" bolts. Three 5/16" NCthreaded holes on each side of rail. (On one side theyare evenly spaced & one the other side they aregrouped close to one end.) Twelve holes on back ofchannel in 3 groups of 4. Eight of the holes are drilled11/32" and the other four have a 5/16" NC thread.
Note: frames are not interchangeable. Order left fordrivers side or right for passengers side or pairs. Learn More -
Mack side frame
Each flange has 10 holes, 4 tapped 5/16" NC threadsand 6 drilled clearance for 5/16" bolts. One anglebracket 18 1/2" down from end, with a 3/8" diameterhole. One 5/16" NC hole on one side of the channeland five 5/16" NC holes on the other. Two 5/16"NC holes on back of channel.
Note: frames are not interchangeable. Order left fordrivers side or right for passengers side or pairs. Learn More -
Mack side frame
Top and bottom flanges each have 7 holes, 4 tapped5/16" NC and 3 drilled clearance for 5/16" bolts.Two sleeves for cross bars welded to gussets. Total of31 - 5/16" NC threaded holes on channel, 5 on oneside, 6 on other side and 20 on flat side of channel.
Note: frames are not interchangeable. Order left fordrivers side or right for passengers side or pairs.
Left shown here.
Learn More -
Mack side frame
Top & bottom flanges each have 7 holes, 4 tapped5/16" NC threads and 3 drilled clearance for 5/16"bolts. Two sleeves for cross bars welded to gussets.Total of 36 - 5/16" N.C. threaded holes on channel, 5on engine side, 9 on grille side and 22 on flat side ofchannel.
Note: frames are not interchangeable. Order left fordrivers side or right for passengers side or pairs. Learn More -
Mack side frame
These frames have three 5/16" NC threaded holes along the grill side of the frame, and eight 5/16" NC threaded holes along the back of the frame, one mounting bracket on the back of the frame, and an offset header.
Note: order Left or Right as these frames are not interchangeable.
These frames match with tank #6626.
Learn More