Side Frame
-
International cross flow bottom frame
Both flanges step down1/4" at gussets. Both flanges have 10 holes, 4 tapped5/16" NC and 6 drilled clearance for 5/16" bolts.Channel is cut-out in center to accommodate bolts onmounting bracket. Frame has a total of 31 holes alltapped 5/16" NC for brackets and shroud, etc. formounting bracket. Learn More -
International side frame
Cross flow top frame. Both flanges step down 1/4" atgussets. Both flanges have 10 holes, 4 tapped 5/16"N.C. and 6 drilled clearance for 5/16" bolts. Framehas a total of 25 holes for brackets and shroud, etc., 21holes tapped 5/16" N.C. and 4 holes are drilledclearance for 3/8". Learn More -
International side frame
This cross flow top frame has ten holes in each flange - two threaded @ 5/16" NC. There are seven 5/16" NC threaded studs and two angle brackets with 3/8" holes on the back of the frame, four 5/16" NC threaded studs on grill side, and four 5/16" NC threaded holes on shroud side.
Note: this frame pairs with frame #6551, as well as tanks #643C, #643-2LF, and #643-3LF.
Learn More -
International side frame
Cross flow bottom frame. Four 5/16" N.C. threaded studs on grill side. Four 5/16" N.C. threaded holes on fan side. Two mounting brackets on the back of the frame at 18" centers, 5 1/2" high. Clearance hole for bolts on each bracket. Learn More -
International side frame
Cross flow top frame. Flange has 10 holes, four drilled & tapped 5/16". Two 5/16" studs on the grill side of the frame. Six 5/16" studs on back side of the frame. NOTE: Goes with tank #6491 & #6492. Learn More -
International bottom frame
Cross flow bottom frame. Both flanges have 10 bolt holes, four drilled and tapped 5/16" N.C., six drilled 3/8" O.D. for 5/16" bolts. Two 5/16" studs on the fan side and two 5/16" studs on grill side. Two keyhole style brackets on back of the frame for mounting. Learn More -
International side frame
Top frame has ten 5/16" studs. NOTE: Goes with tank #648LF Learn More -
International side frame
Bottom rail. Flange has 13 bolt holes. There are two mounting brackets 27" center to center. Six 5/16" N.C. mounting studs. Learn More -
Mack side frame
Flanges on both ends have 8 holes, 4 tapped 5/16"NC and 4 drilled clearance for 5/16" bolts. Variousother holes for shroud, brackets, etc.
Note: frames are interchangeable. Learn More -
Mack side frame
Flanges on both ends have 8 holes (2 tapped 3/8" NCand 6 drilled clearance for 3/8" bolts). Extra bracket onone side with two 5/16" NC threaded holes.
NOTE: Frames are not interchangeable. Order left fordrivers side or right for passengers side or pairs. Learn More