Side Frame
-
Locomotive side frame
This frame has three 1/4" NC threaded holes along the back, and a 1/2" NC threaded boss on the back.
Learn More -
Fire Truck side frame
This frame has eleven 3/8" NC threaded hole along the back, and six 1/4" threaded holes along the edges. The end flanges have fourteen bolt holes (three of them threaded).
Matches with tanks #524, #525, #526, #061208A
Learn More -
Motor Home side frame
This frame has two 1/2" NC threaded studs @ 20 3/4" centers, 2 1/2" long, and centered both ways on the frame.
Sample must be supplied by the customer.
Learn More -
Ottawa Shunt Truck side frame
This frame has four boltholes on each flange, eight 5/16" NC threaded holes on the back of theframe, a block on the back of the frame with twelve 3/8" NC threadedholes to attach the mounting bracket (sold separately - part #051909D),and three 5/16" NC threaded holes along the side of the frame formounting the shroud. Learn More -
Champion Grader side frame
This side frame has six 3/8" NC threaded holes (three on the fan side, three on the grill side), and four 3/8" diameter by 3/4" long slotted holes.
Learn More -
Bolt-on side frame
This frame has eight 5/16" threaded holes along the back of the frame, and a mounting bracket on the back.
Learn More -
Ottawa Shunt Truck side frame
This side frame has eight 5/16" NC threaded nuts along the back, and a 1/2" thick block with eight 3/8" NC threaded holes to attach mounting bracket #042810F.
Bolt pattern matches #041408A.
Learn More -
New Flyer Bus Top and Bottom Frames
Each frame has five 5/16" NC threaded holes along one edge of the frame, six 5/16" C threaded holes along the opposite edge, eight 5/16" NC threaded holes along the back of the frame, and four notches on the edges.
Frame #042009A is manufactured with 10 gauge material, and frame #042009B is manufactured with 3/16" material.
Matches with tank #7435.
Learn More -
Case side frame
This frame has seven 5/16" NC threaded holes along the edge of the frame, and nine 5/16" threaded holes along the opposite edge of the frame.
Learn More -
Case side frame
This frame has five 5/16" NC threaded holes along the back of the frame, and an angle on the side of the frame with 5 clearance holes.
Learn More