Side Frame
-
Western Star side frame
This frame has a 5/16" NC threaded nut in each gusset, two "ears" with 3/8" threaded nuts to mount CAC, two 1/4" NC threaded holes along the same edge of the "ears" and four !/4" NC threaded holes along the opposite edge, and 14 3/8" NC threaded holes an the back of the frame.
The flanges have 12 bolt holes - eight 3/8" diameter clearance holes, and four 5/16" NC threaded holes.
Learn More -
Western Star side frame
This frame has four 1/4" NC threaded holes along each edge, ten 3/8" NF threaded holes on the back, two mounting bosses for cross bars, and two mounting studs to mount the CAC. There are 12 bolt holes on each end.
These frames are not interchangeable - order left or right accordingly (right frame shown here).
Note: this frame is the same as frame #528, except for the CAC mounting bolts. Also known as part #081709B.
Learn More -
Western Star side frame
This frame has four 5/16" NC Threaded holes along the back of the flange, two 3/8" NC studs on the sides, and twenty x 3/8" NC threaded holes along the back of the frame for mounting blocks, etc. These frames are interchangeable - Left or Right.
Note: these frames are used in conjunction with tank #5093.
Learn More -
Western Star side frame
Top and bottom flanges each have 12 holes, 4 tapped5/16" N.C. threads and 8 drilled clearance for 5/16". Mtg. bosses for cross bars.bolts. Each side of channel has 4 - 1/4" N.C. threadedholes. Back of channel has ten 3/8" N.F. threadedholes. NOTE: Side frames are interchangeable. Learn More -
Western Star side frame
Top & bottom flanges have 12 holes in each, 4 tapped5/16" N.C. threads and 8 drilled clearance for 5/16"bolts. Four 1/4" N.C. threaded holes in each side ofchannel. Ten 3/8" N.C. threaded holes on back ofchannel. ( 1 group of 4; 1 group of 6) Gussets haverectangular cut-outs for tube access.NOTE: Side frames are interchangeable. Learn More -
Western Star side frame
Top & bottom flanges have 11 holes, 3 tapped 5/16"N.C. threads and 8 drilled clearance for 5/16" bolts.Top flange also has an over hang extending to 12 1/2"with 3 more holes drilled clearance for 5/16" bolts.Gusset on over hang has 6 holes, 5 of them drilled7/16" dia. and one 3/4" dia. Various other holes forbrackets & shroud etc.NOTE: Frames are not interchangeable. Order left fordriver's side or right for passenger side or pairs. Learn More -
Western Star side frame
Top & bottom flanges each have 11 holes, six drilledclearance for 5/16" bolts and five tapped 5/16" N.C.threads. Top flange extends to 12 1/2" wide with threemore holes drilled clearance for 5/16" bolts. Gusseton top supports overhang with six holes drilled 7/16"dia. and one hole 3/4" dia. Various other holes forshroud & brackets etc.NOTE: Frames are not interchangeable. Order left fordriver's side or right for passenger's side or pairs. Learn More -
Western Star side frame
Top & Bottom flanges have 11 holes, 3 tapped 5/16" NC threads and 8 drilled clearance for 5/16" bolts. Top flange also has an overhang extending to 12 1/2" with 3 more holes drilled clearance for 5/16" bolts. Gusset on overhang has 6 holes, 5 of them drilled 7/16" dia. and 3/4" dia. Various other holes for brackets, shroud, etc.
Note: frames are not interchangeable. Order left for driver's side or right for passenger side or pairs. Learn More -
Western Star side frame
Top flange has 12 holes, 7 tapped 5/16" N.C. threadsand 5 drilled clearance for 5/16" bolts. Bottom flangehas 9 holes, 4 tapped 5/16" N.C. threads and 5 drilledclearance for 5/16" bolts. Five 1/4" N.C. threadedholes on each side of frame. Sixteen holes on back ofchannel, 9 holes are 3/8" N.C. threads and 7 are 1/4"N.C. threads. Two notches in side of rail.NOTE: Side frames are not interchangeable. Order leftfor drivers side and right for passengers side or pairs. Learn More -
Western Star side frame
This frame has nine 3/8" NC threaded holes along the back, seven 1/4" threaded holes along the edge to accommodate the shroud, and two notches on the side. The top flange has 12 bolt holes; seven of them threaded @ 5/16" NC, and the bottom flange has 9 bolt holes; four threaded @ 5/16" NC.
LEFT shown here
Note: this frame matches with tank #501 and tank #511
Learn More