Side Frame
-
International cross flow frame
This frame has five 5/16" NC threaded holes along the fan and grill side for fan guard mounting, and six 3/8" NC threaded holes along the back of the frame for mounting the radiator. Each flange has 10 bolt holes.
Note: this frame matches tank #6408 and tank #6409.
Learn More -
Mack side frame
These frames have three 5/16" NC threaded holes along the grill side of the frame, and eight 5/16" NC threaded holes along the back of the frame, one mounting bracket on the back of the frame, and an offset header.
Note: order Left or Right as these frames are not interchangeable.
These frames match with tank #6626.
Learn More -
Peterbilt side frame
Top and bottom flanges each have 12 holes, ten drilledclearance for 5/16" bolts and two tapped 5/16" NC.One bracket on side of channel near top with twoholes drilled clearance for 1/2" bolts. Angle bracketson each side of channel with 1/4" NC threaded holes.
Note: frames are not interchangeable. Order left or right accordingly.
Learn More -
New Flyer Bus side frame
This frame has twelve 3/8" NC threaded holes and eight 5/16" NC threaded holes on the back of the rail, and seven 5/16" NC threaded holes along each edge. Flanges have eight holes each (four of them threaded 5 /16" NC).
Learn More -
Orion 5 side frame
This frame has eight 3/8" NC threadedholes and two 1/4" threaded holes along each edge, and a mountingbracket on the back of the frame. Learn More -
Cat side rails L&R, 45", 12" channel width, rails are not interchangeable also come in 51" length Learn More