Side Frame
-
New Flyer Bus side frame
#112812A - Side of the frame has four 3/8" NC threaded holes, and five 5/16" NC threaded holes.
#112812B - Side of the frame has five 5/16" NC threaded holes, and the back of the frame has eight 3/8" NC threaded holes.
These frames match with a pair of #042011B tanks.
Learn More -
Orion Bus side frame
This frame has an angle bracket on the back, five 1/4" NC threaded holes along the edge, and four 3/8" NC threaded holes and two 1/4" NC threaded holes along the opposite edge. There are 6 bolt holes on each end.
Learn More -
Orion Bus side frame
This frame has four 3/8" threaded holes along each edge, and four 3/8" threaded holes along the back. There are 6 bolt holes on each end.
Learn More -
Western Star side frame
This frame has nine 3/8" NC threaded holes along the back, seven 1/4" threaded holes along the edge to accommodate the shroud, and two notches on the side. The top flange has 12 bolt holes; seven of them threaded @ 5/16" NC, and the bottom flange has 9 bolt holes; four threaded @ 5/16" NC.
LEFT shown here
Note: this frame matches with tank #501 and tank #511
Learn More -
Western Star side frame
This frame has four 5/16" NC Threaded holes along the back of the flange, two 3/8" NC studs on the sides, and twenty x 3/8" NC threaded holes along the back of the frame for mounting blocks, etc. These frames are interchangeable - Left or Right.
Note: these frames are used in conjunction with tank #5093.
Learn More -
Western Star side frame
This frame has four 1/4" NC threaded holes along each edge, ten 3/8" NF threaded holes on the back, two mounting bosses for cross bars, and two mounting studs to mount the CAC. There are 12 bolt holes on each end.
These frames are not interchangeable - order left or right accordingly (right frame shown here).
Note: this frame is the same as frame #528, except for the CAC mounting bolts. Also known as part #081709B.
Learn More -
Western Star side frame
This frame has a 5/16" NC threaded nut in each gusset, two "ears" with 3/8" threaded nuts to mount CAC, two 1/4" NC threaded holes along the same edge of the "ears" and four !/4" NC threaded holes along the opposite edge, and 14 3/8" NC threaded holes an the back of the frame.
The flanges have 12 bolt holes - eight 3/8" diameter clearance holes, and four 5/16" NC threaded holes.
Learn More -
AutoCar side frame
This frame is 37 7/8" long. It is similar to frame #526, except that there is less of an overhang, and there is an additional bracket welded on the side.
There are twelve 3/8" NC threaded nuts on the back of the frame for mounting purposes. Left and right are mirror images of each other.
This particular frame belongs to an Auto Car garbage truck.
Learn More -
Kenworth side frame
This frame has 12 bolt holes per flange (two threaded 5/16" NC), and various brackets along the back of the frame for mounting a variety of attachments (CAC, condensers, etc...), and there are "ears" on the gussets for mounting an oil cooler.
Note: this frame matches with tank #5911 and tank #6024.
Learn More -
International side frame
This frame has a large mounting bracket on the back of the frame slightly off center, four 3/8" NC threaded holes on each side of the frame, and four 5/16" NC threaded studs along the side of the frame.
Note: this frame matches tank #6471 and tank #6472.
Learn More