Side Frame
-
Mack side frame
Top and bottom flanges each have 10 holes, 6 drilledclearance for 5/16" bolts and four tapped 5/16" NCTop flange also has a bracket extending the width to9", with two holes drilled clearance for 5/16" bolts.Frame has three angle brackets, two with 3/4"diameter holes and one with 3/8" diameter hole.Various other holes for shroud, brackets, etc.
Note: frames are not interchangeable. Order left fordrivers side or right for passengers side or pairs. Learn More -
Mack side frame
Top flange has 10 holes, 6 drilled clearance for 5/16"bolts and 4 tapped 5/16" NC threads. Top flange alsohas a bracket extending the header width to 9", withtwo more holes drilled clearance for 5/16" bolts.Frame has three angle brackets. Various other holesfor brackets, shroud, etc.
Note: frames are not interchangeable. Order left fordrivers side or right for passengers side or pairs. Learn More -
Mack side frame
Flanges on both ends have 8 holes, 2 tapped 5/16"NC and 6 drilled clearance for 5/16" bolts. Variousother holes for shroud, brackets, etc.
Note: side frames are interchangeable. Learn More -
Mack side frame
Flanges on both ends have 8 holes, 2 tapped 5/16"NC thread and 6 drilled clearance for 5/16" bolts.Various other holes for shroud, brackets, etc.
Note: frames are interchangeable. Learn More -
Mack side frame
Flanges on both ends have 8 holes, 2 tapped 5/16"NC and 6 drilled clearance for 5/16" bolts. Variousother holes for shroud, brackets, etc.
Note: side frames are interchangeable.
Learn More -
Mack side frame
Top & bottom flange each have 8 holes, 4 tapped5/16" NC and 4 drilled clearance for 5/16" bolts.One bracket on fan side with two 5/16" NC threadedholes. Various other holes on sides and back forshroud, brackets, etc.
Note: frames are not interchangeable. Order left fordrivers side or right for passengers side or pairs. Learn More -
Mack side frame
These frames have three 5/16" NC threaded holes along the grill side of the frame, and eight 5/16" NC threaded holes along the back of the frame, one mounting bracket on the back of the frame, and an offset header.
Note: order Left or Right as these frames are not interchangeable.
These frames match with tank #6626.
Learn More -
Mack side frame
Top & bottom flanges each have 7 holes, 4 tapped5/16" NC threads and 3 drilled clearance for 5/16"bolts. Two sleeves for cross bars welded to gussets.Total of 36 - 5/16" N.C. threaded holes on channel, 5on engine side, 9 on grille side and 22 on flat side ofchannel.
Note: frames are not interchangeable. Order left fordrivers side or right for passengers side or pairs. Learn More -
Mack side frame
Top and bottom flanges each have 7 holes, 4 tapped5/16" NC and 3 drilled clearance for 5/16" bolts.Two sleeves for cross bars welded to gussets. Total of31 - 5/16" NC threaded holes on channel, 5 on oneside, 6 on other side and 20 on flat side of channel.
Note: frames are not interchangeable. Order left fordrivers side or right for passengers side or pairs.
Left shown here.
Learn More -
Mack side frame
Each flange has 10 holes, 4 tapped 5/16" NC threadsand 6 drilled clearance for 5/16" bolts. One anglebracket 18 1/2" down from end, with a 3/8" diameterhole. One 5/16" NC hole on one side of the channeland five 5/16" NC holes on the other. Two 5/16"NC holes on back of channel.
Note: frames are not interchangeable. Order left fordrivers side or right for passengers side or pairs. Learn More