Side Frame
-
Mack side frame
Each flange has 14 holes, 4 tapped 5/16" NC and 10drilled clearance for 5/16" bolts. Three 5/16" NCthreaded holes on each side of rail. (On one side theyare evenly spaced & one the other side they aregrouped close to one end.) Twelve holes on back ofchannel in 3 groups of 4. Eight of the holes are drilled11/32" and the other four have a 5/16" NC thread.
Note: frames are not interchangeable. Order left fordrivers side or right for passengers side or pairs. Learn More -
Mack side frame
Top flange is L shaped with 9 holes (6 holes drilledclearance for 5/16" bolts and 3 holes tapped 5/16"NC threads). Bottom flange has 11 holes (8 drilledclearance for 5/16" bolts and 3 holes tapped 5/16"NC threads). Six 5/16" NC threaded holes on eachside. Six 3/8" N.C. threaded holes on the back.
NOTE: Frames are not interchangeable. Order left fordrivers side or right for passengers side or pairs. Learn More -
Mack side frame
Each flange has 10 holes, four tapped 5/16" NC anddrilled clearance for 5/16" bolts. One angle bracketwith a 3/8" slotted hole 7 3/4" down from end. Oneangle bracket with a 3/8" hole 10 1/4" from end tocenter. Two 5/16" NC holes on back of channel.Five 5/16" NC holes on one side of channel.
Note: frames are not interchangeable. Order left fordrivers side or right for passengers side or pairs. Learn More -
Mack side frame
Flanges on both ends have 8 holes (2 tapped 3/8" NCand 6 drilled clearance for 3/8" bolts). Extra bracket onone side with two 5/16" NC threaded holes.
NOTE: Frames are not interchangeable. Order left fordrivers side or right for passengers side or pairs. Learn More -
Mack side frame
Flanges on both ends have 8 holes, 4 tapped 5/16"NC and 4 drilled clearance for 5/16" bolts. Variousother holes for shroud, brackets, etc.
Note: frames are interchangeable. Learn More -
International cross flow frame
This frame has five 5/16" NC threaded holes along the fan and grill side for fan guard mounting, and six 3/8" NC threaded holes along the back of the frame for mounting the radiator. Each flange has 10 bolt holes.
Note: this frame matches tank #6408 and tank #6409.
Learn More -
International side frame
This frame has a large mounting bracket on the back of the frame slightly off center, four 3/8" NC threaded holes on each side of the frame, and four 5/16" NC threaded studs along the side of the frame.
Note: this frame matches tank #6471 and tank #6472.
Learn More -
International side frame
Bottom rail. Flange has 13 bolt holes. There are two mounting brackets 27" center to center. Six 5/16" N.C. mounting studs. Learn More -
International side frame
Top frame has ten 5/16" studs. NOTE: Goes with tank #648LF Learn More -
International bottom frame
Cross flow bottom frame. Both flanges have 10 bolt holes, four drilled and tapped 5/16" N.C., six drilled 3/8" O.D. for 5/16" bolts. Two 5/16" studs on the fan side and two 5/16" studs on grill side. Two keyhole style brackets on back of the frame for mounting. Learn More