Frame
-
Bus Side Frame
This frame has a length of 28 3/4". It has an angle bracket on the back of the frame for mounting, four 1/4" NC threaded holes along the edge of the frame, and four 3/8" NC threaded holes and two 1/4" NC threaded holes along the opposite edge of the frame.
Note: may have Orion applications.
Learn More -
Bus Side Frame
Top & bottom flanges each have 12 bolt holes, four have 5/16" NC threaded holes. The engine side has five 5/16" NC threaded holes. The grille side four 5/16" NC threaded holes. There are 2 brackets.
Note: frames are not interchangeable. Order left for driver's side or right for passenger's side or pairs.
Right side shown here.
Learn More -
Eldorado Bus Frame.
Top & bottom flanges each have 4 bolt holes. There are four 3/8" N.C. nuts on each side. NOTE: Rail matches tank #7423 & #7424 Learn More -
Eldorado Bus Frame
Top & Btm flanges each four 3/8" bolt holes. On each side there are three 3/8" N.C. nuts. One bracket on the back of the frame with a 1/2" holes for mounting. Learn More -
Ikarus Frame
Top & bottom flange has 4 bolt holes on each. There are four, 3/8" NC threaded holes on each side of the rail. Learn More -
Ikarus Bus Side Frame
Top & bottom flange has 4 bolt holes each. On each side of the frame there are five 3/8" threaded holes. One bracket on the back of the frame.
Note: frames are not interchangeable. Order left for driver's side or right for passenger's side or pairs. Learn More -
Bus Side Frame
This frame has three 3/8" NC threaded holes along the edge, four 1/4" NC threaded holes along the edge, four 3/8" NC threaded holes on the back, and five 5/16" NC threaded bolt holes. This frame comes with an "insert" that acts as an inner channel, and sits on the core side of the frame.
Note: these frames are NOT interchangeable - order LEFT or RIGHT
(RIGHT shown here)
Learn More -
Ford top frame
Small flange has 11 holes, 4 tapped 5/16"N.C. and 7 drilled clearance for 5/16" bolts. Largeflange has 13 holes, 6 tapped 5/16" N.C. and 7 drilledclearance for 5/16" bolts. Large flange also has anelongated hole 1" X 1 3/4". Back of frame has 4 holestapped 5/16" N.C. Various other holes for bracketsand cross bars etc. Learn More -
Ford bottom frame
The small flange has 11 holes - 5 tapped5/16" NC threads and 6 drilled clearance for 5/16"bolts. The large flange is L shaped with 10 holes - 7tapped 5/16" NC threads and 3 drilled clearance for5/16" bolts. There are two tapered mounts @ 6" centers with3/4" NC threaded nuts, and two 7/16" NC nuts weldedon the side for cross bars. This frame is deep and narrow. Learn More -
Ford side frame
The top flange has 7 holes tapped 5/16"NC and the bottom flange has 5 holes tapped 5/16" NC. There is a mounting pin 15/16" in diameter by 1 5/8" longlocated 5 9/16" up from bottom flange.
Note: frames are not interchangeable. Order left fordrivers side or right for passengers side or pairs. Learn More