Frame
-
Bus Side Frame
The flanges on this frame have three 5/16" NC threaded holes along the back, four 3/8" NC threaded mounting holes on the back of the frame, and three 5/16" NC threaded holes along the edge of the frame for mounting the shroud or finger guard.
Lefts and rights are not interchangeable - order accordingly.
Learn More -
Bus Side Frame
Each end has five holes - 3 tapped 5/16" NC threadsand 2 drilled clearance for 5/16" bolts. There are six 5/16" NCthreaded nuts - three on each side of the rail.
Note: frames are interchangeable. Learn More -
Bus Side Frame
Each end has nine holes, 3 tapped 5/16" NC and 6 drilled clearance for 5/16" bolts. Four 3/8" NCthreaded holes on the back of the channel. Four 5/16" NC threaded holes on each side of channel. Three 3/4"diameter holes in the back.
Note: frames are not interchangeable. Order left fordrivers side or right for passengers side or pairs. Learn More -
Bus Frame
This frame is the same as #736, but 2" shorter and has no Z bracket.
Note: frames are not interchangeable. Order left fordrivers side or right for passengers side or pairs. Learn More -
Bus Frame
Top and bottom flanges each have 8 holes (4 tapped5/16" NC), an angle bracket on one side with three 3/8" NCthreaded holes, three 3/8" NC threaded holes on the other sideof channel, four 3/8" NC threaded holes on the back ofthe channel, and a Z shaped bracket on the back with a 1/2"diameter hole through the center.
Note: these frames are not interchangeable - order left fordrivers side or right for passengers side or pairs. Learn More -
Bus Frame
The top & bottom flange has eight 3/8" diameter bolt holes on each. On the fan side of the rail there are four 5/16" NC threaded holes, and on the grill side of the rail there are four 5/16" NC threaded holes. On the back of the frame there are four 3/8" NC threaded holes. Learn More -
Bus Frame
Top & bottom flanges each have eight 5/16" NCthreaded holes. Angles welded to each side of the railhave four 5/16" NC threaded holes. Twelve 3/8"NC threaded holes are on the back of the channel (to suit twodifferent models).
Note: frames are not interchangeable. Order left fordrivers side or right for passengers side or pairs. Learn More -
Bus Side Frames
Top and bottom flanges each have 9 holes, 6 drilledclearance for 5/16" bolts and 3 tapped 5/16" NCthreads. Eight 3/8" NC threaded holes, one group of4 near the top and one group of 4 near the bottom.Eight 5/16" threaded holes - 4 on each side. Three3/4" diameter holes in channel.
Note: frames are interchangeable. Learn More -
Bus Side Frame
Each end has 8 holes, 4 tapped 5/16" NC and 4drilled clearance for 5/16" bolts. Four 3/8" NCthreaded holes on back of channel. Three 5/16" NCthreaded holes on one side and on 5/16" NC threadedhole on the other. Frame works for both left or right.
Matches tanks #750 & #751. Learn More -
Bus Side Frame
This frame has a length of 28 3/4", and it has eight 3/8" NC threaded holes along each edge - fan and grill side.
Note: may have Orion applications.
Learn More