Frame
-
Eldorado Bus Frame
Top & Btm flanges each four 3/8" bolt holes. On each side there are three 3/8" N.C. nuts. One bracket on the back of the frame with a 1/2" holes for mounting. Learn More -
Eldorado Bus Frame.
Top & bottom flanges each have 4 bolt holes. There are four 3/8" N.C. nuts on each side. NOTE: Rail matches tank #7423 & #7424 Learn More -
Bus Side Frame
Top & bottom flanges each have 12 bolt holes, four have 5/16" NC threaded holes. The engine side has five 5/16" NC threaded holes. The grille side four 5/16" NC threaded holes. There are 2 brackets.
Note: frames are not interchangeable. Order left for driver's side or right for passenger's side or pairs.
Right side shown here.
Learn More -
Bus Side Frame
This frame has a length of 28 3/4". It has an angle bracket on the back of the frame for mounting, four 1/4" NC threaded holes along the edge of the frame, and four 3/8" NC threaded holes and two 1/4" NC threaded holes along the opposite edge of the frame.
Note: may have Orion applications.
Learn More -
Bus Side Frame
This frame has a length of 28 3/4", and it has eight 3/8" NC threaded holes along each edge - fan and grill side.
Note: may have Orion applications.
Learn More -
Bus Side Frame
Each end has 8 holes, 4 tapped 5/16" NC and 4drilled clearance for 5/16" bolts. Four 3/8" NCthreaded holes on back of channel. Three 5/16" NCthreaded holes on one side and on 5/16" NC threadedhole on the other. Frame works for both left or right.
Matches tanks #750 & #751. Learn More -
Bus Side Frames
Top and bottom flanges each have 9 holes, 6 drilledclearance for 5/16" bolts and 3 tapped 5/16" NCthreads. Eight 3/8" NC threaded holes, one group of4 near the top and one group of 4 near the bottom.Eight 5/16" threaded holes - 4 on each side. Three3/4" diameter holes in channel.
Note: frames are interchangeable. Learn More -
Bus Frame
Top & bottom flanges each have eight 5/16" NCthreaded holes. Angles welded to each side of the railhave four 5/16" NC threaded holes. Twelve 3/8"NC threaded holes are on the back of the channel (to suit twodifferent models).
Note: frames are not interchangeable. Order left fordrivers side or right for passengers side or pairs. Learn More -
Bus Frame
The top & bottom flange has eight 3/8" diameter bolt holes on each. On the fan side of the rail there are four 5/16" NC threaded holes, and on the grill side of the rail there are four 5/16" NC threaded holes. On the back of the frame there are four 3/8" NC threaded holes. Learn More -
Bus Frame
Top and bottom flanges each have 8 holes (4 tapped5/16" NC), an angle bracket on one side with three 3/8" NCthreaded holes, three 3/8" NC threaded holes on the other sideof channel, four 3/8" NC threaded holes on the back ofthe channel, and a Z shaped bracket on the back with a 1/2"diameter hole through the center.
Note: these frames are not interchangeable - order left fordrivers side or right for passengers side or pairs. Learn More