Frame
-
Bus Side Frame
This frame has a length of 31 7/8", and has eight 3/8" NC threaded holes along each edge of the frame.
Learn More -
Ford side frame
Top flange has 11 bolt holes, five tapped5/16" N.C. and 6 drilled clearance for 5/16" bolts.Bottom flange has 10 holes, 3 are tapped 5/16" N.C.and 7 drilled to clear 5/16" bolts. One bracket 22"from top flange.
Note: frames are not interchangeable. Order left fordrivers side or right for passengers side or pairs. Learn More -
Ford bottom frame
Small flange has 13 bolt holes, threeholes tapped 5/16" N.C. and ten holes drilledclearance for 5/16" bolts. Large flange has 15 boltholes, five holes tapped for 5/16" N.C. and ten holesdrilled clearance for 5/16" bolts. Two mounting studsat 30 1/2" centres. Various other holes for brackets,etc. Learn More -
Ford top frame
The small flange has 13 bolt holes - fivetapped 5/16" NC and eight drilled to clear 5/16"bolts. the large flange has 15 bolt holes - seven tapped5/16" NC and eight drilled clearance for 5/16" bolts There is one bracket in the center of the frame with a 1 1/4" hole.
Note: pairs with #691 bottom frame. Learn More -
Ford side frame
The top flange has 7 holes tapped 5/16"NC and the bottom flange has 5 holes tapped 5/16" NC. There is a mounting pin 15/16" in diameter by 1 5/8" longlocated 5 9/16" up from bottom flange.
Note: frames are not interchangeable. Order left fordrivers side or right for passengers side or pairs. Learn More -
Ford bottom frame
The small flange has 11 holes - 5 tapped5/16" NC threads and 6 drilled clearance for 5/16"bolts. The large flange is L shaped with 10 holes - 7tapped 5/16" NC threads and 3 drilled clearance for5/16" bolts. There are two tapered mounts @ 6" centers with3/4" NC threaded nuts, and two 7/16" NC nuts weldedon the side for cross bars. This frame is deep and narrow. Learn More -
Ford top frame
Small flange has 11 holes, 4 tapped 5/16"N.C. and 7 drilled clearance for 5/16" bolts. Largeflange has 13 holes, 6 tapped 5/16" N.C. and 7 drilledclearance for 5/16" bolts. Large flange also has anelongated hole 1" X 1 3/4". Back of frame has 4 holestapped 5/16" N.C. Various other holes for bracketsand cross bars etc. Learn More -
Bus Side Frame
This frame has three 3/8" NC threaded holes along the edge, four 1/4" NC threaded holes along the edge, four 3/8" NC threaded holes on the back, and five 5/16" NC threaded bolt holes. This frame comes with an "insert" that acts as an inner channel, and sits on the core side of the frame.
Note: these frames are NOT interchangeable - order LEFT or RIGHT
(RIGHT shown here)
Learn More -
Ikarus Bus Side Frame
Top & bottom flange has 4 bolt holes each. On each side of the frame there are five 3/8" threaded holes. One bracket on the back of the frame.
Note: frames are not interchangeable. Order left for driver's side or right for passenger's side or pairs. Learn More -
Ikarus Frame
Top & bottom flange has 4 bolt holes on each. There are four, 3/8" NC threaded holes on each side of the rail. Learn More