Frame
-
Bus Frame
This frame is the same as #736, but 2" shorter and has no Z bracket.
Note: frames are not interchangeable. Order left fordrivers side or right for passengers side or pairs. Learn More -
Bus Side Frame
Each end has nine holes, 3 tapped 5/16" NC and 6 drilled clearance for 5/16" bolts. Four 3/8" NCthreaded holes on the back of the channel. Four 5/16" NC threaded holes on each side of channel. Three 3/4"diameter holes in the back.
Note: frames are not interchangeable. Order left fordrivers side or right for passengers side or pairs. Learn More -
Bus Side Frame
Each end has five holes - 3 tapped 5/16" NC threadsand 2 drilled clearance for 5/16" bolts. There are six 5/16" NCthreaded nuts - three on each side of the rail.
Note: frames are interchangeable. Learn More -
Bus Side Frame
The flanges on this frame have three 5/16" NC threaded holes along the back, four 3/8" NC threaded mounting holes on the back of the frame, and three 5/16" NC threaded holes along the edge of the frame for mounting the shroud or finger guard.
Lefts and rights are not interchangeable - order accordingly.
Learn More