Cross Flow Tank
-
Prevost Bus cross-flow tanks
#030413A - Inlet tank
This tank has a 2 1/2" diameter hose connection 4" long 14 5/8" from the edge of the tank to the center of the pipe, and a 5/16" NC bolt-on header underneath the hose connection.
#030413B - Outlet tank
This tank has a 2 1/2" diameter hose connection 4" long 10 3/4" from the edge of the tank to the center of the pipe, a 5/16" NC bolt-on header underneath the hose connection, and a 1/4" NPT coupling at each end of the tank.
Bolt hole pattern matches tank #516
Tanks match up with frames #030313C and #030413D.
Learn More -
Bus cross flow tank
Inlet Tank
This tank has a 2" diameter hose connection (3" long) 2 1/2" from the edge of the tank to the center of the hose connection, an angle bracket offset to the grill side of the tank with a pair of 1/2" slots at 14 7/8" centers, and a 1 1/4" pipe that comes out and up on a 90o angle to accommodate the fill neck 2 1/2" from the edge of the tank to the center of the pipe.
Outlet Tank
This tank has a 2" diameter hose connection (3" long) 2 1/2" from the edge of the tank to the center of the hose connection, an angle bracket offset to the grill side of the tank with a pair of 1/2" wide slots at 14 7/8" centers, and a pair of 1/4" NPT fittings - one on the engine side opposite the hose connection, and one on the end of the tank by the hose connection.
Learn More -
Bus cross flow tank
This tank has a 2 1/2" diameter hose connection, a 1/4" NPT flange, and three brackets for mounting placed as shown.
Note: tanks are shown as top - A, bottom - B. Left and right tanks are determined by the placement of the brackets. TAKE CARE WHEN ORDERING
Learn More -
Bus bolt-on tank
This tank has a 2" diameter hose connection, and two 3/8" NF threaded nuts spaced @ 14" centers. Hose connection and nuts are placed off center.
Learn More -
Bus cross flow tank
This tank has a 2 1/2" diameter hose connection, and two 1/4" NPT fittings (one on each end).
Learn More -
Bus cross flow tank
This tank has a 2 3/4" diameter hose connection, a 1/4" NPT flange next to the hose connection, and a 1/4" NPT flange on one end of the tank.
Learn More -
Motor Home cross-flow tank set
Right Tank
This tank has a 2 1/2" diameter hose connection, a 2 3/8" diameter hose connection, a baffle inside the tank that separates the hose connections, a 1/4" NPT plug at one end for draining, a 3/4" NPT flange at the front, and a large mounting bracket.
Left Tank
This tank has a 14 plate oil cooler with 18" centers (1418PC), a 1/4" NPT plug for draining, and a large mounting bracket.
Learn More -
Bus cross flow tank
This tank has a 2 1/2" diameter hose connection, and a 1/4" NPT fitting at one end.
Learn More -
Bus cross flow tank
This tank has a 2 1/2" diameter hose connection 5 1/4" from the edge of the tank to the center of the hose connection, and a 1/4" NPT flange on each end.
Learn More -
Freightliner cross flow tank
This blank tank has rounded corners. There is a 1/4" NPT flange on each end.
Note: matches with tank #459LF. Learn More