Cross Flow Tank
-
International cross flow tank
This tank has a 2 1/2" diameter hose connection 6" in from the end ofthe tank straight out towards the engine. There is a 1/4" NPT flange on each end. The tank is only 1 1/2"deep, and has two corners of the header cut on 45 degree angle. Learn More -
International cross flow tank
This tank has a 2 1/2" diameter hose connection facing the engine, two1/4" NPT flanges - one on rise of tank and oneat the shallow end of the tank.
Note: this tank is the mirror image of tank #643 ( 2 1/2" hoseconnection on other side) with one more fitting at end. Learn More -
International cross flow tank
This tank has a 1 1/4" diameter hose connection straight out towards theengine, a 1" diameter hose connection on a 90oangle facing the engine, a baffle in the tank approx. 1/2"off center that splits the tank left to right, and a 1/4" NPT flange on the shallow endof the tank.
Note: this tank is a mirror image of tank #643LF Learn More -
International cross flow tank
This basic blank tank has 1/4" NPT flange on the shallow side of the tank.
Note: matches tank #643-2LF Learn More -
International cross flow tank
This tank has a 2 1/2" diameter hose connection that bends at 90o, and a 1/2" NPT flange on end of the tank. Learn More -
International cross flow tank
This tank has a 2 1/2" diameter hose connection straight out tothe engine 10 3/8" in from end to center, and one 1/4" NPTcoupling welded in end of tank on approximately a 45o angle. Learn More -
International cross flow tank
This tank has a 2 1/2" diameter hose connection that bends @ 90o and angles slightly upwards, and a 1/4" NPT flange on the end. Learn More -
International cross flow tank
Low flow tank - mate to #637LF. Tank has no fittingsor hose connections. Learn More -
International cross flow tank
This tank has a 2 1/2" diameter hose connection with a 45o elbow that points upward, and a 7 plate oil cooler with fittings @ 18" centers (#718PC).
Note: this tank is identical to tank #638, except for the oil cooler.
Learn More -
International cross flow tank
This tank has a 2 1/2" diameter hose connection with a 45o elbow that points upwards.
Note: if you need this tank with an oil cooler, order tank #6381.
Learn More