Cross Flow Tank
-
International cross flow tank
This tank has a 2 1/2" diameter hose connection, 9" in from the end ofthe tank straight out towards the engine. There is a 1/4" NPT flange on each end. This tank is only 1 1/2"deep, and has two corners of the header cut on a 45 degree angle. Learn More -
International cross flow tank
This drivers side blank tank has a 1/4" NPT flangeon each end. The tank is 1 1/2" deep and the header cornerson grille side are cut on a 45 degree angle. Learn More -
International cross flow tank
This passenger side tank has a 1" diameter hoseconnection near the top and a 1-1/4" diameter hoseconnection near the bottom. A baffle divides the tank width-wise at the center, and there is a1/4" NPT flange in each end. Two corners of the header are cut on45 degree angle. Learn More -
International cross flow tank
This tank has a 2 1/2" diameter hose connection, 6-1/4" in from end,coming out on approximately a 45 degree angle andturned on approximately a 30 degree angle. There is one 1/4"NPT flange on the opposite end. Learn More -
International cross flow tank
This tank has a 2 1/2" diameter hose connection 8 1/4" from the end,coming out on approximately a 60 degree angle andturned on approximately a 30 degree angle. There is a 1/4" NPT flange on each end. Learn More -
Mack cross flow tank
This tank has a 2 1/2" diameter hose connection, and a 3/8" NPT flange.
Note: tank #6628 is the same tank with a 7 plate oil cooler with 18" centers (718PC).
Learn More -
Mack cross flow tank
This tank has a 2 1/2" diameter hose connection with a 3/8" NPTflange next to it, and a 1 1/4" diameterhose connection coming out of the end of the tank at a90o angle and facing into the rad at about a 45o angle. Learn More -
Ford cross flow tank
This tank has a 2 1/2" diameter hose connection, two 1/2" NPT flanges, and a corner of the header is cut off at a 45 degree angle.
Note: the two 1/2" NPT fittings are optional. Theyare welded on all model #680 tanks but are not drilledthrough. Check against original tank to see if eitherone is needed. Learn More -
-
Ford cross flow tank
This tank has a 2 1/2" diameter hose connection, two 1/2" NPTflanges, and two 5/16" NC threads on the bottom @ 2"centers. Learn More