Bottom Tank
-
Roof Scaler bolt-on bottom tank
This tank has a 2" diameter hose connection, a 1/4" NPT coupling for a drain fitting, and two mounting pads each with a 5/16" NC threaded stud @ 24" centers.
Washer bars - A pair of 1" x 1/4" x 6 3/8" - 4 BH
- A pair of 1" x 1/4" x 26 1/8" - 14 BH
Tank mates with tank #060111A.
SAMPLE REQUIRED
Learn More -
Gen Set bolt-on bottom tank
This tank has a 3" diameter hose connection, and a 3/8" NPT flange for a drain fitting.
Learn More -
Fire Truck bottom tank
This tank has a 3" diameter hose connection, a 1/4" NPT flange for a drain, and a 14 plate oil cooler with 18" centers (1418PC).
Learn More -
MCI Bus bottom tank
This tank has a 2" diameter hose connection, and two 3/8" NF mounting nuts @ 14" centers.
Pairs with top tank #061510A and with washer bar #061510C.
Learn More -
Bolt-on bottom tank
This tank has a 2 1/2" diameter hose connection, a 1/4" NPT flange for a drain fitting, and a PTO cutout in the center of the tank.
Learn More -
Fire Truck Bottom Tank
This tank has a 2 3/4" diameter hose connection 3" long, a 1/4" NPT flange on the grill side for a drain, two 5/8" NC studs 3" long @ 18" centers, and a 14 plate oil cooler @ 18" centers (1418PC) (replaces bundle oil cooler).
SAMPLE REQUIRED
Learn More -
Tractor bottom tank
This tank has a bolt-on flange for the hose connection, and a 1/4" NPT flange for a drain cock.
Note: for this tank, a sample must be provided by the customer.
Learn More -
Bolt-on bottom tank
This tank has a bolt-on style flange, a PTO cutout with a 1/4" NPT flange on either side, and two 5/8" NC threaded nuts for mounting.
Learn More -
Fire Truck bottom tank
This tank has a 2 3/4" diameter hose connection (comes out of the tank at 90o then angles up towards the engine), a 10 plate 18" center oil cooler (1018PC), a 1/4" NPT flange, and a 1/2" NPT flange.
Front and back view shown here.
Learn More -
Champion Grader bottom tank
This tank has a 2 1/4"diameter hose connection, a shutter flange, two 1/4" NPT flanges on thebottom of the tank, and a PTO cut-out in the center of the tank. Learn More