Bottom Tank
-
Ford bottom tank
This tank has a 3 1/2" diameter hose connection straight out thebottom and turns on approximately 45 degree angleupwards, and a 1/8" NPT flange for a drain cock. Learn More -
Ford bottom tank
This tank has a 3 1/4" diameter 60o hose connection on a slightangle facing upwards, and a 1/8" NPT flange for a drain cock. Learn More -
Ford bottom tank
This tank has a 2 1/4" diameter hose connection on a 90o bendout of the bottom of the tank, a bolt-on typeconnection with two 5/16" NC threaded holes, and a1/4" NPT flange on top of the hose connection.
Front and back view shown here.
Learn More -
Mack bottom tank
This tank is a mirror image of tank #665, so the rectangular flange is onpassengers side. Learn More -
Mack bottom tank
This tank has a bolt-on type flange on the drivers side with four 3/8"NC threaded holes, a 3/8" NPT fitting in the corner, and a 1" I.D. bushing mount in the center of the tank. Learn More -
Mack bottom tank
Tank has a 5" wide x 1" deep cut-out in centre ofheader for power take off, creating two 6 1/8" x12 1/4" header flanges with 22 bolt holes each.Flanges & mounts are the same as #664. Learn More -
Mack bottom tank
This tank has a flange in the center with a 2 3/4" diameter hole andtwo bolt holes with 7/16" NC threads, a flange onthe drivers side with 1 1/2" diameter hole and two 5/16" NCbolt threads, and two mounts with 5/8" NC threads @ 9"centers. Learn More -
Mack bottom tank
This tank has a 2 1/2" diameter hose connection, a 3/8" NPT flange for a drain cock, and a 7 plate oil cooler with 18" centers (718PC).
Note: this tank is similar to a #6626, but with 34 bolt holes.
Learn More -
Mack bottom tank
This tank has a bolt-on type flange with four 7/16" NC threadedholes, and two 5/8" NC mounting holes @ 9" centers.
Note: same as tank #663 but shorter. Learn More -
Mack bottom tank
This tank has a bolt-on type flange angled at approximately 40 degrees, with four 7/16" NC threadedholes. There are two 5/8" NC mounting holes @ 9" centers. Learn More