1-888-723-8265 | Contact Us

Welcome to Taalman

Bottom Tank

Grid List

Set Ascending Direction

41-50 of 244

  1. #7199 HDR: 37 1/2" X 6 1/2" - 42 BH

    Peterbilt bottom tank

    This tank has a 3" hose connection, 11 1/2" from the edge of the tank to the center of the hose connection.  The connection comes first straight down out of the tank, then bends at 90 degrees to face the engine.  This tank is similar to the 7195, except that the hose connection does not sweep upward.

    Note:  this tank shares the bolt hole pattern with tank #719 and tank #708.

    Learn More
  2. #7198 HDR: 31 1/4"x 6" - 42 BH
    Peterbilt bottom tank

    This tank has a 2 1/2" hose connection that points downward then angles at 90o towards the driver side.  There is a 1/4" NPT flange at the bottom of the hose connection, and a PTO cutout in the center of the tank.

    Note:  this tank shares a bolt pattern with tank #511 and tank #800.
    Learn More
  3. #7197 - HDR: 31 1/4" x 6" - 42 BH
    Peterbilt bottom tank

    This tank has a 2 1/2" hose connection that points downwards then bends at a 90o angle towards the engine, and a 1/2" NPT flange for a drain cock.

    Note:  this tank shares a bolt pattern with tank #511 and tank #800.
    Learn More
  4. #7196 - HDR: 31 1/4" x 6" - 42 BH - 8 lbs.
    Peterbilt bottom tank

    This tank has a 1 1/4" diameter hose connection, and a 3/8" NPT flange.  There is a cut-out in the center of the tank to accommodate a PTO.
    Learn More
  5. #7195 - HDR: 37 1/2" x 6 1/2" - 42 BH - 15 lbs.
    Peterbilt bottom tank

    This tank is similar to tank #719, except the 3" diameter hose connection is curved back and up toward the engine. Learn More
  6. #719 - HDR: 37 1/2" X 6 1/2" - 42 BH - 14 lbs
    Peterbilt bottom tank

    This tank has a 3" diameter hose connection facing to ground.

    Note:  this tank pairs with top tank #708.
    Learn More
  7. #718LF - 37 1/2" X 6 1/2" - 42 BH - 14 lbs
    Peterbilt bottom tank

    This low-flow tank has one 1 1/4" diameter hose connectionon a 90o angle facing up and out to passengerside on approximately 45o angle. One 1/4"NPT flange for a drain fitting on the deep section of the tank. Learn More
  8. #718 - HDR: 37 1/2" X 6 1/2" - 42 BH - 14 lbs
    Peterbilt bottom tank

    This tank has one bolt-on type flange with four 7/16" NC threaded holes, a 3/8" NPT flange, and two 1/4" NC threaded nuts mounted on the header flange. Learn More
  9. #7172 - HDR: 37 1/2" x 6 1/2" - 42 BH

    Peterbilt bottom tank

    This tank has a 2 1/2" diameter hose connection 15 3/4" from the edge of the tank to the center of the hose connection that comes straight out the bottom of the tank.

    Note:  bolt pattern is the same as a #719.

     

    Learn More
  10. #7171 - HDR: 31 1/4" x 6 1/8" - 42 BH

    Peterbilt tank

    This tank has a 2 1/2" hose connection that comes out at the bottom of the tank then bends 90o, a 1/4" NPT flange for a drain cock, and a PTO cut-out in the center of the tank.

    Note:  bolt pattern is the same as a #514 or a #800

    Learn More

Grid List

Set Ascending Direction

41-50 of 244