Bottom Tank
-
-
AutoCar bottom tank
This tank has two bolt-on type flanges with two 7/16" NCthreaded holes in each, two 5/8" NC mountingthreads @ 4" centers, a PTO cut-out in the middle, and three 1/4" NC threaded nuts welded on the headerfacing the engine. Learn More -
GMC bottom tank
This tank has a baffle that runs along the length of the tank down the middle, a 1" and a 1 1/4" diameter hose connection, and a 1/4" NPT flange near the 1" hose connection.
Note: the 1 1/4" diameter hose connection runs to the far side of the baffle.
Learn More -
GMC bottom tank
This tank has a bolt-on flange with four 3/8" threaded holes, and a 1/4" NPT flange. Learn More -
GMC bottom tank
This tank has a 3 1/2" diameter hose connection facing straight out on the passenger side, a 1/2" and 1/4" NPT flange, and two mounting studs with 1/2" NC threads @ 8" centers. Learn More -
GMC bottom tank
This tank has a 2 3/4" diameter hose connection facing straight outon the passenger side, and a 1/4" NPT flange. Learn More -
GMC bottom tank
This tank is the same as tank #765 except the 2 3/4" diameter hose connection faces out and slightly down on the passenger side. Learn More -
GMC bottom tank
This tank has a 2 3/4" diameter hose connection coming straight out on the passenger side, and a 1/4" NPT flange on the driver side. The tank tapers from 1 7/8" deep on driver side to 3 3/4" deep at the pipe connection on the passenger side. Learn More -
GMC bottom tank
This tank has a 1" diameter hose connection on a 90o angle facing up and out to the driver side, a 2" diameter hose connection on approximately a 30o angle also facing slightly up and out to driver side, and a 1/4" NPT flange. Learn More -
GMC bottom tank
This tank has a 2 3/4" diameter hose connection coming out of tank at an 80o angle and facing down on a 45o angle on the passenger side, and a 1/4" NPT fitting on the bottom. The front side of the tank slopes opposite the hose connection. Learn More