Bolt On Tanks
-
Bus Top Frame
This frame has eight 3/8" NC threaded holes along each edge of the frame.
Note: matches tank #7433, #753, and #754.
Learn More -
Bus Btm Frame
This Bus frame has a length of 32 1/4", with eight 3/8" NC threaded holes along the edge of the frame, and four 1/2" NC threaded holes along the back of the frame.
Note: the header bolt pattern matches #7433, #753, #754 tanks.
Learn More -
Bus cross flow tank
This tank has a 2 1/2" diameter hose connection 4" from the edge of the tank to the center of the hose connection, and a 1/4" NPT flange on one end of the tank.
Note: bolt pattern is the same as a #7433 tank
Learn More -
Gillig Bus Tank Tank has a 3" dia. hose cnnection - 10" from end to center, 1/4" NPT fitting Learn More -
MCI Bus top tank
This tank has a 2 1/4" diameter hose connection, a bracket and two 1/4" NPT flanges on the top of the tank, and a baffle across the width of the tank 11 1/2" from the end of the tank.
Note: this tank pairs with bottom tank #7511. Learn More -
MCI Bus bottom tank
This tank has a two pass high flow system. There is a 2 1/2" diameter hose connection, a 3/8" NPT flange, and a baffle intersects the tank across the width 11 1/2" from the end of the tank.
Note: this tank pairs with top tank #7512. Learn More -
Bus Bottom Tank
This tank has a 2 3/4" diameter hose connection, and a 3/8" NPTflange next to the hose connection. Tank tapers in depthfrom approximately 3 1/4" deep to 3/4" deep.
Note: pairs with tank #750 Learn More -
Bus top tank
This tank has a bolt-on flange with two 7/16" NC threads,a 3/8" NPT flange, and an angle bracket in the centerwith a 1/2" diameter hole.
Note: this tank pairs with tank #751. Learn More -
Bus Bottom Tank
This tank has a 2 3/4" diameter hose connection on the passengers side,and a 1/4" NPT flange. Tank depth tapers frompassengers side to drivers side.Note: matches tank #748 Learn More -
Bus top tank
This tank has a bolt-on type filler with two 3/8" NC threads, two 3/8" NC threaded holes next to the filler opening, and a 1/4" NPT flange on the end of the tank.
Note: pairs with tank #749. Learn More