Bolt On Tanks
-
GMC bottom tank
This tank has a 2 3/4" diameter hose connection facing straight outon the passenger side, and a 1/4" NPT flange. Learn More -
GMC bottom tank
This tank is the same as tank #765 except the 2 3/4" diameter hose connection faces out and slightly down on the passenger side. Learn More -
GMC bottom tank
This tank has a 2 3/4" diameter hose connection coming straight out on the passenger side, and a 1/4" NPT flange on the driver side. The tank tapers from 1 7/8" deep on driver side to 3 3/4" deep at the pipe connection on the passenger side. Learn More -
GMC bottom tank
This tank has a 1" diameter hose connection on a 90o angle facing up and out to the driver side, a 2" diameter hose connection on approximately a 30o angle also facing slightly up and out to driver side, and a 1/4" NPT flange. Learn More -
GMC bottom tank
This tank has a 2 3/4" diameter hose connection coming out of tank at an 80o angle and facing down on a 45o angle on the passenger side, and a 1/4" NPT fitting on the bottom. The front side of the tank slopes opposite the hose connection. Learn More -
GMC bottom tank
This tank has a 3" diameter hose connection coming out the bottom of the tank on approximately a 30o angle, and a 1/4" NPT flange. The tank tapers from front to back ( 1 3/4" deep to 1 1/4" deep). There is a mounting bracket 4" high with two 1/2" NC threaded nuts @ 8" centers. Learn More -
GMC bottom tank
This tank has a 1 1/4" diameter hose connection on the passenger side coming straight out, a 1" diameter hose connection on driver side on a 90o angle facing towards the center of the tank, two 1/4' NPT flanges, a baffle in the center of the tank, and two mounting nuts with 1/2" NC threads @ 8" centers. Learn More -
GMC bottom tank
This one-pass low flow tank has a 1 1/4" diameter hose connection coming straight out from passenger side facing the engine, a 1/4" NPT fitting next to the pipe, and a mounting bracket with two 1/2" NC threaded nuts @ 8" centers. Learn More -
-
GMC bottom tank
This tank has a rectangular flange with four 3/8" NF threads, a 1/4" NPT flange, and two mounting brackets with 1/2" NC threads @ 8" centers. Two corners on the header are cut on a slight angle. Learn More