Bolt On Tanks
-
Ottawa Shunt Truck bottom tank
This tank has a 2"diameter hose connection, a 1" diameter bypass connection, a 1/2" NPTflange, a 1/4" NPT flange for a drain cock on the grill side of thetank, a mounting bracket with three holes for bolting into the unit andone larger hole for the isolation rubber, an extension bracket with thesame bolt pattern as the mounting bracket, and a seven plate oil coolerwith 18" centers (718PC). Learn More -
Ottawa Shunt Truck side frame
This frame has four boltholes on each flange, eight 5/16" NC threaded holes on the back of theframe, a block on the back of the frame with twelve 3/8" NC threadedholes to attach the mounting bracket (sold separately - part #051909D),and three 5/16" NC threaded holes along the side of the frame formounting the shroud. Learn More -
Ottawa Shunt Truck shroud
This shroud has overalldimensions of 26" x 24 1/2" x 4" deep. There is a 23 3/4" diameterhole for the fan, four 5/16" threaded mounting nuts, six slotted holesfor mounting the shroud to the radiator, and two large access slots toaccommodate a hose. Learn More -
Ottawa Shunt Truck mounting bracket
This bracket attaches to side frame #051909B. It has one large hole for an isolation grommet.
Note: brackets are for left or right - order accordingly. Learn More -
Bolt-on complete set
Top Tank
This tank has a 4" NPT coupling, a hole for a filler neck in the top center of the tank, and four 1/2" NC threaded holes at each end of the tank to attach the side frames.
Bottom Tank
This tank has a 4" NPT coupling, a 3/4" NPT coupling for a drain, and four 1/2" NC threaded holes at each end of the tank to attach the side frames.
Side Frames
These frames have eight holes to accommodate 1/2" bolts to attach to the tanks, a hole to accommodate a lifting hook, two holes in the foot plate to attach to a mounting block, and a series of 3/8" diameter holes.
Note: this set comes supplied with four washer bars 66" long with 33 bolt holes, and four washer bars 7" long with 5 bolt holes.
Learn More -
Generator bottom tank
This bottom tank has a 3 1/2" hose connection in the center of the tank, facing downward, and offset to the one side. Learn More -
Oshkosh bolt-on bottom tank
This tank has a bolt-on style flange, two 5/8" diameter mounting holes, and two mounting blocks @ 8" centers.
Learn More -
Gen Set bolt-on bottom tank
This tank has a 2 1/2" diameter hose connection, a 1" diameter bypass hose on the grill side of the tank, a bracket on the back, and a 3/4" NPT coupling for drainage.
Learn More -
Bus Bottom Tank
This tank has a 2 3/4" diameter hose connection that comes out the bottom and angles @ 90o, a 3/8" NPT flange for a drain, and two 5/16" NC threaded holes on each end of the tank.
Learn More -
Blue Bird Bus oil cooler core and tank
This oil cooler tank has an 1810PC - 3 pass oil cooler, two 2 1/4" diameter hose connections @ 3" centers, a 3/4" NPT flange to accommodate a 90o street elbow (not included), and there are four slotted mounting holes in the base plate.
Learn More