Bolt On Tanks
-
1946 Welland Tractor bottom tank
This tank has a 2 7/8" diameter hose connection, and a 1/4" NPT flange for a drain fitting.
Learn More -
Champion Grader side frame
This side frame has six 3/8" NC threaded holes (three on the fan side, three on the grill side), and four 3/8" diameter by 3/4" long slotted holes.
Learn More -
Gen Set complete solder-on set
Top Tank
This tank has a 1 3/4" diameter hole on the top center to accommodate a truck filler neck, a 2 1/4" diameter hose connection, a 1/8" diameter bypass hose, a de-aeration baffle, and a curved bar with threaded holes to attach the engine cover.
Bottom Tank
This tank has a 2 1/4" diameter hose connection, a 3/4" NPT flange for drainage, and four 5/8" NC nuts for mounting.
Side Frames
These frames have a 9 bolt hole flange, five 5/16" NC bolt holes run along the width, a 3/8" NC nut is in the back center of the frame, two 5/16" NC nuts are on the back edge, four 5/16" NC nuts run along the fan side, and three 5/16" NC nuts run along the grill side.
Note: this set comes supplied with brackets - two bolt holes on one face, and one hole with 1/4" NC nuts.
Samples must be supplied by the customer.
Learn More -
Champion Grader top tank
This tank has a 2 1/4" diameter hose connection 5" from the edge ofthe tank to the center of the hose connection, and a 1/4" NPT flangenext to the hose connection to accommodate an expansion tube.
Learn More -
Gillig Bus btm tank
This tank has a 3" diameter hoseconnection in the front center of the tank, and a 1/4" NPT flange onthe top for an expansion fitting.
Note: pairs with bottom tank #073109G Learn More -
Bolt-on complete set
Top and Bottom Tanks
Both tanks are the same. They have a 2 1/2" NPT coupling, and a 1/4" NPT flange.
Side Frames
These frames have flanges that are 7 7/8" wide x 6" deep, and they have two 1/2" NC threaded holes to accommodate lifting hooks.
Note: this set is supplied with four washer bars 30 3/8" long with 15 bolt holes.
Learn More -
Bus Side Frame
This frame is identical to frame #7307, except that the six bolt holes on each of the headers are slotted.
Learn More -
Bolt-on blank tank
This is a blank tank with large brackets roughed in on the top. Customer to finish the bolt holes, etc, to accommodate the application.
Learn More -
Gen Set complete solder-on set
Top Tank
This tank has a 2" diameter hose connection, and a 1/4" NPT flange to accommodate an expansion tube.
Bottom Tank
This tank has a 2" diameter hose connection, and a 1/4" NPT flange to accommodate a drain cock.
Side Frames
These frames are 31 11/16" long, and have four 5/16" NC nuts along the fan and grill side. Flange has eight 3/8" diameter bolt holes.
Note: this set comes supplied with four washer bars 24 7/8" long with 13 bolt holes.
Learn More -
Locomotive Bottom Tank
This tank has a 2" NPT coupling, and two mounting blocks with a hole for the bolts.
SAMPLE REQUIRED
Sample Required Learn More