Bolt On Tanks
-
Ottawa Shunt Truck washer bars
These washer bars belong to tanks #042810B, 042810C, and frame #042810D.
Bolt pattern matches tank #041408A.
Learn More -
Ottawa Shunt Truck fan shroud
This fan shroud belongs with #042810A, #042810B, #042810D combination.
It has a 27" diameter hole for the fan, and various threaded holes and slotted holes for mounting purposes.
Learn More -
Center Bar for four core radiator
This center bar is 1" thick by 1 1/4" wide headers. The original radiator template was 43 1/4" x 8 5/8" with 52 bolt holes.
Learn More -
Gen Set bolt-on complete set
Top Tank
This tan has a 1 3/4" diameter hose connection 6 3/4" long, a de-airation baffle, a 3/4" NPT fitting for a bypass hose, a 3/8" NPT flange for a sensor fitting, and a 1/4" NPT flange for a vent line.
Bottom Tank - HDR: 23 3/8" x 7"
This tank has a 2 1/4" diameter hose connection, a 3/8" NPT flange for a sensor fitting, two 5/8" NF mounting studs @ 12" centers, and a 3/4" NPT fitting for a fill line.
Side Frames
These frames are 21" long, with 3 5/16" NC threaded holes along each edge.
Washer Bars
14 1/4" x 1" x 1/4" - 7 BH - 4 per unit
Learn More -
Fire Truck bottom tank
This tank has a 3" diameter hose connection, a 1/4" NPT flange for a drain fitting on the bottom of the tank, and a 1418PC plate oil cooler.
Note: Original tank has a 2 bolt on flange for hose connection
Learn More -
Bolt-on complete set
Top Tank
This tank has a 2 1/4" diameter hose connection, a 1" diameter bypass connection, two 1/4" NPT flanges for sensors etc, a 1/2" NPT flange on the grill side for a sight glass, and two 1/2" NC threaded holes on each end for lifting.
Bottom Tank
This tank has a 2 1/2" diameter hose connection, a 1/2" NPT flange, two 10 plate oil coolers with 18" centers (1018PC), and two 1/2" NC threaded holes for mounting.
Side Frames
These frames have five 5/16" threaded holes along each side for mounting the shroud, and a block with two 1/2" NC threaded holes for mounting.
Note: this set is supplied with four long washer bars.
Learn More -
Bus bottom tank
This tank has a 2 1/2" diameter hose connection, two mounting brackets, and two 1/4" NPT flanges.
Learn More -
Oshkosh bolt-on bottom tank
This tank has a 2" diameter hose connection, and a #1018PC plate oil cooler.
Learn More -
This tank has a 2" diameter hose connection, a 1" diameter bypass, two 1/4" NPT flanges, a 1/2" NPT flange for a sight glass on the grill side, a stand pipe for a fill neck, and a deairiation baffle. Learn More
-
1946 Welland Tractor bolt-on top tank
This tank has two 2 1/8" diameter hose connections, two 1/4" NPT flanges, a 1" diameter bypass hose, a 1 1/4" diameter hole for a fill neck, a 1/2" NPT flange for a sight glass, a deairation baffle, and a row of threaded 5/16" NC threaded nuts to bolt to the header.
Note: samples are required to reproduce this particular set.
Learn More