Bolt On Tanks
-
Champion Grader top tank
This tank has a 2" diameter hose connection in the middle of thetank, and 1 3/4" diameter hole in the top center of the tank toaccommodate a truck filler neck. This tank also contains a baffle tocreate a surge-like area inside the tank.
Learn More -
Bolt-on bottom tank
This bottom tank is a basic blank tank with four 1/2" NC threaded studs on each end.
Learn More -
International surge tank
This surge tank has a 1" diameter bypass hose connection, two 3/8" diameter overflow hose connections, a 1 1/2" NPT nipple, a 1/4" NPT flange, two 1/2" NPT flanges for sight glasses, and various brackets around the tank for mounting. One side of the tank is contoured for a proper fit.
Learn More -
Hydraulic Tank
This hydraulic tank has a 1/2" NPT fitting on the bottom of the tankfor a drain, two 1/2" NPT fittings on the front of the tank, a 3/4" NPTfitting on the front of the tank, a 1 1/4" NPT nipple on the front ofthe tank, a bolt-on flange on the top of the tank with ten 5/16" NCthreaded studs, and two mounting feet on each side - each with two 3/8"diameter holes for bolting down.
Learn More -
Bolt-on bottom tank
This tank has a 2 1/4" diameter hose connection that angles @ 90o, a mounting bracket, a 1/4" NPT flange, and a 1/2" NPT flange.
Learn More -
Ottawa Shunt Truck top tank
This tank has two 1/2" NPT flanges for sight glasses, a flange type hose connection, a 1" diameter bypass hose, two 1/4" NPT flanges, a 1 3/4" diameter hole for a filler neck and a deairation baffle.
Bolt hole pattern matches #041408A.
Learn More -
Bolt-on top tank
This tank has a 1/2" NPT flange for a sight glass on one end, a 2 1/4" diameter hose connection, a 3/4" NPT flange for a bypass hose, two 1/4" NPT flanges, a 1 3/4" diameter hole on top for a filler neck, a 3/4" NPT coupling for a fast fill line, and a deairation baffle.
Bolt pattern matches #041408A.
Learn More -
Ottawa Shunt Truck side frame
This side frame has eight 5/16" NC threaded nuts along the back, and a 1/2" thick block with eight 3/8" NC threaded holes to attach mounting bracket #042810F.
Bolt pattern matches #041408A.
Learn More -
Bolt-on side frame
This frame has eight 5/16" threaded holes along the back of the frame, and a mounting bracket on the back.
Learn More -
Ottawa Shunt Truck bracket
This bracket has a mounting hole, and four clearance holes to mount to the corresponding side frame.
Matches with side frame #042810D.
Learn More