Bolt On Tanks
-
Bus cross flow tank
This tank has a 2 1/2" diameter hose connection, and a 1/4" NPTflange facing the engine. The tank is 1 3/4" deep. Learn More -
Bus cross flow tank
This tank has a 2 1/2" diameter hose connection on a 90o angle, and a 1/4" NPT flange at the end. Learn More -
Bus cross flow tank
This tank has a 2 1/2" diameter hose connection facing straight out tothe engine, and a 1/4" NPT flange on the end. Learn More -
Bus top tank
This tank has a bolt-on type filler with two 3/8" NC threads, two, 3/8" NC threaded holes next to the filler opening, and two 1/4" NPT flanges.
Note: pairs with tank #741 & #7411. Learn More -
Bus Side Frame
Each end has five holes - 3 tapped 5/16" NC threadsand 2 drilled clearance for 5/16" bolts. There are six 5/16" NCthreaded nuts - three on each side of the rail.
Note: frames are interchangeable. Learn More -
Bus Side Frame
Each end has nine holes, 3 tapped 5/16" NC and 6 drilled clearance for 5/16" bolts. Four 3/8" NCthreaded holes on the back of the channel. Four 5/16" NC threaded holes on each side of channel. Three 3/4"diameter holes in the back.
Note: frames are not interchangeable. Order left fordrivers side or right for passengers side or pairs. Learn More -
Bus Frame
This frame is the same as #736, but 2" shorter and has no Z bracket.
Note: frames are not interchangeable. Order left fordrivers side or right for passengers side or pairs. Learn More -
Bus Frame
Top and bottom flanges each have 8 holes (4 tapped5/16" NC), an angle bracket on one side with three 3/8" NCthreaded holes, three 3/8" NC threaded holes on the other sideof channel, four 3/8" NC threaded holes on the back ofthe channel, and a Z shaped bracket on the back with a 1/2"diameter hole through the center.
Note: these frames are not interchangeable - order left fordrivers side or right for passengers side or pairs. Learn More -
Bus Frame
The top & bottom flange has eight 3/8" diameter bolt holes on each. On the fan side of the rail there are four 5/16" NC threaded holes, and on the grill side of the rail there are four 5/16" NC threaded holes. On the back of the frame there are four 3/8" NC threaded holes. Learn More -
Bus Frame
Top & bottom flanges each have eight 5/16" NCthreaded holes. Angles welded to each side of the railhave four 5/16" NC threaded holes. Twelve 3/8"NC threaded holes are on the back of the channel (to suit twodifferent models).
Note: frames are not interchangeable. Order left fordrivers side or right for passengers side or pairs. Learn More