Bolt On Tanks
-
Bus Bottom Tank
This tank is the same as tank #747 but the hose connection is closer to the edge of the tank.
Note: pairs with tank #746. Learn More -
Bus Bottom Tank
This tank has a 2 3/4" diameter hose connection on the passengers side,and a 1/4" NPT flange.
Note: pairs with tank #746 Learn More -
Bus top tank
This tank has a bolt-on type flange with two 3/8" NC threadedholes, two 3/8" NC threaded holes next to filleropening, and two 1/4" NPT flanges.
Note: pairs with tank #747 & #7471. Learn More -
Bus Bottom Tank
This tank has a bolt-on type flange with two clearance holes for 3/8" bolts,and two mounting blocks with two 7/16" NC threadedholes in each, and two 1/4" NC threaded nuts on the headerfacing the engine.
Note: pairs with tank #744 Learn More -
Bus top tank
This tank has a bolt-on type filler with two 3/8" NC threads, two 3/8" NC threaded holes next to the filler opening, two 7/16" NC threaded holes at the end of the tank, three5/16" NC threads along one side of the tank, two blocks with two 1/4" NC threaded holes on the opposite side ofthe tank.
Note: pairs with tank #745. Learn More -
Bus cross flow tank
This tank has a 2 1/2" diameter hose connection 5 1/8" from the edge of the tank to the center of the hose connection, and a 1/4" NPT flange at the one end.
Note: could be mistaken for a #7415 - check the bolt holes
Learn More -
Bus cross flow tank
This tank is basically a blank tank, except for the 1/4" NPT flange for an expansion tube.
Note: this tank mates with tank #7416.
Learn More -
Bus cross flow
This tank has a 2 1/2" diameter hose connection 5 1/4" from the edge of the tank to the center of the hose connection, a baffle separating left from right, and a 1/4" NPT flange at each end of the tank. Learn More -
Bus cross flow tank
This tank has a 2 3/4" diameter hose connection 6" from the edge of the tank to the center of the hose connection, and a cutout for a CAC. The grill side of the tank slopes inward.
Learn More -
Bus cross flow tank
This tank has a 2 3/4" diameter hose connection 5" from the edge of the tank to the center of the hose connection, and 1/4" NPT flanges on either end of the tank. The grill side of the tank is sloped inward. Learn More