Bolt On Tanks
-
Western Star washer bar
This washer bar belongs with tank #5093.
40" long, 1" wide, 1/4" thick.
21 BH (bolt holes)
For use with OE frames only.
Learn More -
Western Star threaded washer bar
This threaded bar belongs with tank #5093. Four 5/16" threaded holes. 6 5/8" long, 7/8" wide, 3/8" thick.
For use with OE frames only.
Learn More -
Bolt-on bottom tank
This tank has a 3 1/2" diameter hose connection, and two 5/8"NC threaded nuts spaced @ 16" centers.
The connection and nuts are offset from the center towards the fan side.
Bolt pattern the same as tanks #591 and #602.
Learn More -
Fire Truck bolt-on bottom tank
This tank is the same as tank #090109A, but with a 2 1/4" diameter hose connection instead of a 3" diameter.
A 2 1/4" diameter hose connection 10" from the edge of the tank to the center of the pipe, a 1/4" NPT flange on the bottom for a drain fitting, and 14 plate oil cooler with fittings @18" centers (#1418PC).
Learn More -
John Deere tank
This bottom tank has a 2 3/4" diameter hose connection 6 3/4" from the edge of the tank to the center of the hose connection, a 1/4" NPT flange on the bottom 9" from the edge of the tank, and 2 large mounting brackets at the back.
Front and back views shown here.
Learn More -
Bolt-on bottom tank
This tank has a 2 3/8" diameter hose connection, two 5/8" NC studs on each end of the tank, and a 3/8" NPT coupling for a drain fitting.
Washer bars to suit are part #040110B. 34" x 1" x 1/4" - 18 BH
Learn More -
Gen Set complete solder-on set
Tanks (both are identical)
Thesetanks have a 2" diameter hose connection, two 1/4" NPT flanges, twothreaded bars with two 1/2" NC holes on each end to mount the sideframes, and the top tank has a hole in the top center for a filler neck.
Side Frames
Eachof these frames has eight 3/4" diameter holes to mount to the tanks,and two 1/2" thick feet on the bottom with two 3/4" diameter holes formounting to the floor.
This tank set includes four long and four short washer bars.
SAMPLE REQUIRED
Learn More -
Bus cross flow tank
Inlet Tank
This tank has a 2" diameter hose connection (3" long) 2 1/2" from the edge of the tank to the center of the hose connection, an angle bracket offset to the grill side of the tank with a pair of 1/2" slots at 14 7/8" centers, and a 1 1/4" pipe that comes out and up on a 90o angle to accommodate the fill neck 2 1/2" from the edge of the tank to the center of the pipe.
Outlet Tank
This tank has a 2" diameter hose connection (3" long) 2 1/2" from the edge of the tank to the center of the hose connection, an angle bracket offset to the grill side of the tank with a pair of 1/2" wide slots at 14 7/8" centers, and a pair of 1/4" NPT fittings - one on the engine side opposite the hose connection, and one on the end of the tank by the hose connection.
Learn More -
Nova Bus end tank
This tank has a 2 1/4" diameter hose connection, and a 1/4" NPT flange for a drain cock. Learn More -
Peterbilt bottom tank
This tank is similar to tank #7172, except that the hose connection is 3" in diameter and on a slight angle from front to back.
Learn More