Bolt On Tanks
-
Kenworth bottom tank
This tank has a flange connection on the top, two 5/8" NC mounting nuts on the top, and two blanked out flange connections on the grill side of the tank.
Note: for this tank, samples must be supplied by the customer.
Learn More -
Fire Truck Bottom Tank
This tank has a 3" diameter hose connection pointing towards the ground, a 1 3/4" diameter hose connection pointing towards the engine, and two 3/8" NPT flanges for drainage.
Learn More -
Surge Tank
Dim: 5" x 8 5/8" long
This surge tank has a 1 1/4" diameter hole for a filler neck, a 1/8" NPT flange next to the filler neck, a 3/4" NPT fitting on the opposite side for a bypass hose, and a mounting bracket.
Learn More -
Fire Truck bottom tank
This tank has a 3" diameter hose connection, and a 1818PC oil cooler (replaces the original "tube bundle" style oil cooler).
Learn More -
Prevost Bus cross-flow tanks
#030413A - Inlet tank
This tank has a 2 1/2" diameter hose connection 4" long 14 5/8" from the edge of the tank to the center of the pipe, and a 5/16" NC bolt-on header underneath the hose connection.
#030413B - Outlet tank
This tank has a 2 1/2" diameter hose connection 4" long 10 3/4" from the edge of the tank to the center of the pipe, a 5/16" NC bolt-on header underneath the hose connection, and a 1/4" NPT coupling at each end of the tank.
Bolt hole pattern matches tank #516
Tanks match up with frames #030313C and #030413D.
Learn More -
Prevost Bus frames
#030413C - Flanges have 8 BH drilled 3/8" and 3 BH threaded 5/16" NC. Each side has six 6mm threaded holes and two 8mm threaded holes. Outer channel has four 8mm threaded holes near the middle, and a 12mm threaded hole at each end. Twp mounting tabs on the side @35 1/4" centers
#030413D - Flanges have 8 BH drilled 3/8" and 3 BH threaded 5/16" NC. Each side has six 6mm threaded holes and two 8mm threaded holes. Outer channel has four 8mm threaded holes near the middle, and a 12mm threaded hole at each end. Two 8mm mounting bolts on the side @35 1/4" centers.
Frames match with tanks #030413A and #030413B.
Learn More -
Komatsu bolt-on bottom tank
This tank has a 2 3/4" diameter hose connection with a 3/4" bypass hose connected to it, two 1/2" x 1 1/4" rails on the bottom, two threaded blocks on the back, and two oil coolers with flanged connections (17 plate with 10" canters, and a 17 plate with 19" centers).
Note: it's much cheaper to re/re the old coolers into the new tank - Taalman can supply the coolers new, but at a significantly higher cost.
Learn More -
Assorted Bus Washer Bars
#030909A - Length: 11 3/4" - 7 BH
#030909B - Length: 14 5/8" - 8 BH
#030909C - Length: 7 1/2" - 5 BH
#030909D - Length: 10 14" - 6 BH
Learn More -
Cat side frame
Flange has 10 bolt holes, and there are five 3/8" NC nuts along the edge of the frame. Frame has an inner channel.
Learn More -
New Flyer Bus Oil Cooler Tank
This tank has a pair of 2 1/2" diameter hose connections; one on either side of the deflection baffle, and a 1/2" NPT flange on either side of the tank.
Learn More