Bolt On Tanks
-
Firetruck washer bar
This "U" style washer bar belongs with tanks #031610B and #031610C.
40 3/8" long with 27 BH. (bolt holes)
Learn More -
Woodchipper Complete Set
Top Tank
This tank has a 2 1/2" diameter hose connection, a 1/4" NPT flange, and a 1 3/4" diameter hole for a filler neck.
Bottom Tank
This tank has a 2 1/2" diameter hose connection, and a 1/4" NPT flange for a drain cock.
Thisset comes with a fan shroud 42" high, 37" wide, 2 7/8" deep, with a 31"diameter hole. Four washer bars also supplied 27 7/8" long with 14bolt holes. Learn More -
Bolt-on complete set with surge tank
Top Tank
This tank has a 3" diameter hose connection 5" long, a 1" NPT coupling in the top center for a fill line, and four threaded blocks (two on each side) with two 1/2" NC threaded holes for mounting the side frames.
Bottom Tank
This tank has a 3" diameter hose connection 5" long, a 3/4" NPT fitting for a drain, and two threaded block (two on each side) with two 1/2" NC threaded holes for mounting the side frames.
Side Frames
These frames have six slotted holes to attach to the tanks, two holes in the foot of the frame to mount to the floor, and two brackets coming off the top to attach the surge tank.
Surge Tank
This tank is 33 1/2" wide, 5" deep, and 12" high, with four threaded blocks with two 1/2" NC threaded holes to attach the side frames, two support feet on the bottom 4" tall, a hole in the top center for a filler neck, and a 1" NPT fitting in the bottom center for a fast fill line.
Learn More -
Bus Side Frame
This side frame is 33 1/4" long , it has a channel along each side of the frame with four 5/16" threaded holes, and it has eight 3/8" NC and four 5/16" threaded holes on the back of the frame.
Learn More -
New Flyer Bus washer bar
Long washer bar that belongs to tank #7435. Eight per radiator.
20 3/16" long by 3/4" wide. 1/4" thick.
Learn More -
-
New Flyer Bus bracket
This bracket has two slotted holes with a clearance notch, and a hole with a 1/4" NC threaded nut.
Learn More -
Bus tank set
This low profile tank (1 5/8") has a 2 3/4" diameter hose connection 3 1/8" from the edge of the tank to the center of the hose connection, and a 3/8" NPT flange in the hose connection for either a drain or an expansion tube.
Shown here with the matching bottom tank.
Learn More -
Bus Bottom Tank
This low profile tank (1 5/8") has a large flange connection with four 3/8" NC threaded blind bolt holes (original tank had 7/16" NC holes) 12 1/2" from the edge of the tank to the center of the 2 3/8" diameter hole in the flange. (the flange is offset to one side)
Shown here with matching top tank.
Learn More -
Paling bolt-on complete set
Top Tank
This tank has a 2 1/2" diameter hose connection 2 3/4" from the edge of the tank to the center of the hose connection, a 1/4" NPT flange 11 1/4" from the edge of the tank, a 1/2" NPT flange 4" from the edge of the tank for a sight glass, a 1 3/4" diameter hole on the top center of the tank for a truck fill neck, a 1/4" NPT flange 3" from the edge of the tank for an expansion tube, and a 1/2" flange in the end of the tank for a sight glass.
Bottom Tank
This tank has a 1/4" NPT flange 2 1/2" from the edge of the tank for a drain, and a 2 3/4" diameter hose connection 2 3/4" from the edge of the tank to the center of the hose connection.
Frames - Frames are 34" long with 9 bolt holes per flange.
Note : tank set comes with washer bars.
Learn More