Bolt On Tanks
-
Cat Loader bolt-on top tank
This tank has a 1 5/8" diameter hose connection, a 1/4" NPT flange for an expansion fitting, and a 1 3/4" diameter hole on the top for a filler neck.
Learn More -
Bus bolt-on tank
This tank has a 2" diameter hose connection, a 3/4" NPT coupling on one end, and a 1/4" NPT flange on the top. Tank tapers from one end to the other.
Learn More -
Bolt-on complete set
Top Tank
This tank has a 2 1/2" diameter hose connection, a 3/4" NPT fitting for a bypass hose, a 1/2" NPT flange on the end of the tank and one on the back for a sight glass, a 1/4" NPT flange on the front and one on the back for a sensor, and a 1 3/4" diameter hole on the top at one end for a filler neck.
Bottom Tank
This tank has a 2 1/2" diameter hose connection, a 1/4" NPT flange for a drain cock, and two 3/4" thick mounting plates with 1/2" NC threaded holes in the center.
Side Frames
These frames have ten 5/16" threaded nuts; five along the grill side and five along the fan side, a mounting block at each end, and two 1/2" NC threaded holes. Each horseshoe flange has eight 3/8" diameter holes to accommodate 5/16" bolts.
Note: for this set, samples must be supplied by the customer.
Learn More -
Bus mounting bracket
This bracket has a header size of 11 1/2" by 4 1/4", two 1/2" NC studs @ 25 1/4" centers, and a cradle to solder to the tank.
Learn More -
Bus Bottom Tank
This tank is identical to tank #751, except it is 9" wide. The bolt pattern has been adjusted to suit.
Learn More -
1957 GMC Bus bottom tank
This tank has two bolt-on flanges, two 5/16" NC threaded nuts on each end of the tank, two 5/16" NC threaded nuts along the fan side, and four 7/16" NC threaded bosses on top of tank for mounting purposes.
Learn More -
New Flyer Bus Oil Cooler Tank
This tank has a pair of 2 1/2" hose connections; one on either side of the deflection baffle.
Learn More -
Bus Bottom Tank
This tank has a 2 3/4" diameter hose connection that faces the ground, two 5/16" NC threaded nuts on each end of the tank, and a 1/4" NPT flange for a drain cock.
Learn More -
Champion Grader bottom tank
This tank has a 2 1/4" diameter hose connection, and a 1/4" NPT flange for a drain fitting.
Note: this tank is the same as tank #073106A, except with a smaller diameter hose connection.
Learn More -
Bolt-on complete set
TopTank
This tank has a 1 3/4" diameter hose connection centered in the tank, and a 1 3/4" diameter pipe to accommodate a filler neck on the top of the tank.
Bottom Tank
This tank has a 2" diameter hose connection 8" from the edge of the tank to the center of the hose connection, an a 1/4" NPT flange for the drain 6" from the edge of the tank.
Side Frames - 22 3/4" long
Note : this set comes with four 21" long washer bars with 11 bolt holes.
Learn More