Top, Btm and Frames
-
Tree Harvester solder-on complete set
Top Tank
This tank has a 2" diameter hose connection, a hole for a filler neck, a 1/4" NPT flange, and a 3/4" NPT flange for a sight glass.
Bottom Tank
This tank has a 2" diameter hose connection, and a 1/4" NPT flange.
Side Frames
These frames have a series of slotted holes along the edges.
Learn More -
Solder-on complete tank set
Top Tank
This tank has a 2" diameter hose connection, a de-airation baffle, a 1/4" NPT flange on the top of the tank for an expansion tube, a 1 3/8" hole for a filler neck, and a 3/4" diameter bypass connection.
Bottom Tank
This tank has a 2" diameter hose connection, and a 1/4" NPT flange for a drain cock.
Frames
These side frames are equipped with many various brackets for mounting.
Learn More -
Gen solder-on complete set
These tanks have 2" diameter hose connections and a 1/4" NPT flange. The top tank has a 1 3/4" diameter hole for a filler neck. The side frames have four 3/8" NC threaded holes along each edge.
Learn More -
Case Tractor solder-on complete set
Top Tank
This tank has a 2 1/4" diameter hose connection, a 1 3/4" diameter hole for a filler neck, and two 1/4" NPT flanges.
Bottom Tank
This tank has a 2" diameter hose connection, a 1/4" NPT flange for a drain fitting, and a 3/8" NPT flange on the bottom for a second drain fitting.
Side Frames
These frames have four 3/8" NC threaded holes along each edge.
Learn More -
Lift Truck solder-on complete set
Right Side Tank
This tank has a 1 1/2" diameter hose connection, a 1 3/8" diameter hole for a filler neck, and a mounting bracket on the back.
Left Side Tank
This tank has a 1 1/2" diameter hose connection, a 1/4" NPT flange for a drain fitting, and a mounting bracket on the back.
Learn More -
Heater Core complete tank set
These tanks have 3/4" diameter hose connections, and the bottom tank has a 1/4" NPT flange for a drain fitting.
Learn More -
John Deere Complete solder-on tank set
Top Tank
This tank has a 2" diameter hose connection 3" from the edge of the tank to the center of the hose connection, and a 1 3/8" diameter hole at the top of the tank for a fill neck.
Bottom Tank
This tank has a 2" diameter hose connection 7" from the edge of the tank to the center of the hose connection, and a 1/4" NPT flange for a drain cock.
Side Frames
These frames have three 3/8" NC threaded mounting nuts along the back of the frame, and eight 3/8" NC threaded mounting nuts along the fan/grill edge (three along one edge, and five along the opposite edge.
Learn More -
Solder-on complete tank set
These tanks have 2 1/2" diameter hose connections and a 1/4" NPT flange for expansion/drain fittings. The top tank has a hole for a filler neck and a mounting bracket on the engine side.
The side frames have four 1/4" NC threaded nuts along the edge, four 1/4" NC threaded nuts and four 3/8" NC threaded nuts on the back.
Learn More -
Gen Set solder-on complete set
Top Tank
This tank has a 1 3/4" diameter hose connection, a 1 3/4" diameter hole for a filler neck, and a 1/2" NPT flange for a sight glass.
Bottom Tank
This tank has a 2" diameter hose connection, and a 1/4" NPT flange for a drain fitting.
Side Frames
These frames have four 5/16" NC threaded holes along the back, and two 5/16" NC threaded holes along each edge. Frames are 33" long.
Learn More -
Solder-on tank set
The top tank has a 1 1/4" diameter stand pipe for a filler neck, and a 1 1/2" diameter hose connection. The bottom tank has a 1 3/4" diameter hose connection, and a 1/4" NPT flange for a drain. The side frames have three 5/16" NC weld nuts along each edge, and four 5/16" NC threaded nuts on the back.
Learn More