Top, Btm and Frames
-
Solder-on complete tank set
Top Tank
This tank has a 2" diameter hose connection, a de-airation baffle, a 1/4" NPT flange on the top of the tank for an expansion tube, a 1 3/8" hole for a filler neck, and a 3/4" diameter bypass connection.
Bottom Tank
This tank has a 2" diameter hose connection, and a 1/4" NPT flange for a drain cock.
Frames
These side frames are equipped with many various brackets for mounting.
Learn More -
Heater Core complete tank set
These tanks have 3/4" diameter hose connections, and the bottom tank has a 1/4" NPT flange for a drain fitting.
Learn More -
Solder-on complete tank set
These tanks have 2 1/2" diameter hose connections and a 1/4" NPT flange for expansion/drain fittings. The top tank has a hole for a filler neck and a mounting bracket on the engine side.
The side frames have four 1/4" NC threaded nuts along the edge, four 1/4" NC threaded nuts and four 3/8" NC threaded nuts on the back.
Learn More -
Solder-on tank set
The top tank has a 1 1/4" diameter stand pipe for a filler neck, and a 1 1/2" diameter hose connection. The bottom tank has a 1 3/4" diameter hose connection, and a 1/4" NPT flange for a drain. The side frames have three 5/16" NC weld nuts along each edge, and four 5/16" NC threaded nuts on the back.
Learn More -
Complete tank set
Top Tank
This tank has two 2 1/4" diameter hose connections, a bracket with slotted holes for mounting, a 1/4" NPT flange for an expansion fitting, and there is a baffle in the center of the tank between the hose connections.
Bottom Tank
This is a blank tank.
Side Frames
These frames are 42 1/2" long by 5" wide. One channel is plain, and the other has three 5/16" threaded nuts along the back.
Note: original unit was all aluminum construction.
Learn More -
Solder-on complete set
Top and bottom tanks are mirror images of each other. Each tank has a 1 1/4" NPT coupling, and a 3/8" NPT coupling. Made of 1/8" thick steel, and have square corners.
Frames are 51 13/16" in length, by 5 1/4" wide. One frame is blank, and the other has five 5/15" NC mounting nuts along each side.
Learn More -
Complete Radiator Set
TopTank
This tank has a 1" diameter hose connection, and a 1 3/8" hole for a filler neck.
Bottom Tank
This tank has a 1" diameter hose connection, a 1/2" NPT coupling for a drain, two 3/8" NC threaded mounting studs, and a 1/4" NPT flange on the grill side.
Side Frames
These frames are 20 1/2" long with two 1/4" NC threaded holes.
For this set, samples must be provided by the customer.
Learn More -
Solder-on complete tank set
Top Tank
This tank has a 2" diameter hose connection, a 1" diameter bypass connection in the center pointing towards the passenger side, and a 1 3/4" diameter hole for a filler neck in the top center of the tank.
Bottom Tank
This tank has a 2 1/2" diameter hose connection 6" from the edge of tank to the center of the hose connection.
Sides
These side frames have a 6" outside diameter, they are 1" deep and 40" long.
Learn More