Top and Btm Tank
-
Solder-on tank set
Top Tank
This tank has a "British Thread" coupling in the center (to be supplied by customer), a 1/4" NPT flange for an expansion fitting, 39 1/8" long heavy steel bracket along the top with four 8mm x 1.25 nuts @36 1/4" centers end-to-end and @4 1/4" centers side-to-side.
Bottom Tank
This tank has a 2 3/8" diameter hose connection 6 1/2" from the edge of the tank to the center of the pipe, a 1/4" NPT flange for a drain fitting, and a reinforcing channel along the bottom 39 1/8" long x 5 1/4" wide.
Learn More -
Solder-on tank set
Top Tank
This tank has a 1 3/4" diameter hose connection, and a 1/4" NPT flange for an expansion fitting.
Bottom Tank
This tank has a 2" diameter hose connection, and a 1/4" NPT flange for a drain fitting.
Learn More -
Solder-on tank set
Top Tank
This tank has a 2" diameter hose connection, and a 1 3/4" diameter hole for a filler neck.
Bottom Tank
This tank has a 2 1/8" diameter hose connection.
Learn More -
Solder-on tank set
Top Tank
This tank has a 2 1/4" diameter hose connection 9 1/2" from the edge of the tank to the center of the hose connection, a 1/4" NPT fitting to accommodate a vent 11 7/8 from the edge of the tank, and a 1 3/4" filler neck hole on the top center of the tank.
Bottom Tank
This tank has a 2 1/2" hose connection 3" long 6 1/2" from the edge of the tank to the center of the hose connection, a 1/4" NPT flange on the grill side of the tank for a drain cock, and a pair of 1/2" NC @ 2" long mounting bolts at 25" centers.
Learn More -
Solder-on tank set
This tanks have 2" diameter hose connections, and the top tank has a 3/8" NPT flange and a 1 3/4" diameter hole for a filler neck.
Learn More -
Solder On tank set
Top Tank
This tank has a pair 1 1/2" diameter hose connections (2 1/2" long) 3 3/4" from the edge of the tank to the center of the hose connections, a 1" bypass hose (1 1/2" long) 9 7/8" from the edge of the tank, a pair of 1/4" NPT flanges 9" in from the edge of the tank (above and below each other), and a fill neck hole in the top center of the tank. This tank has a de-airation baffle.
Bottom Tank
This tank has a 2" diameter hose connection (2 1/2" long) 3 1/4" from the edge of the tank to the center of the hose connection, and a 1418PC plate oil cooler (14 plates, 18" centers) running from the other end.
Learn More -
Heater Core solder-on tanks
Top Tank
This tank has a 1 3/4" diameter hose connection, and a 1/4" NPT flange for an expansion fitting.
Bottom Tank
This tank has a 3/4" diameter hose connection, and a 1/4" NPT flange for a drain fitting.
Learn More -
Solder-on tank set
Top Tank
This tank has a 2 1/2" diameter hose connection 6 1/4" from the edge of the tank to the center of the pipe, and two 1/4" NPT flanges (one on the engine side, and one on the grill side) 13 3/4" from the edge of the passenger-side of the tank to the center of the fitting.
Bottom Tank
This tank has a 2 1/2" diameter hose connection 6 1/4" from the edge of the tank to the center of the pipe, a 1/4" NPT flange on the engine side for a drain fitting, and four 3/8" NC mounting bolts.
Learn More -
Solder-on tank set
Top Tank
This tank has a 1 3/4" diameter hose connection, and a 1/4" NPT flange for an expansion fitting.
Bottom Tank
This tank has a 1 1/2" diameter hose connection, a 1/4" NPT flange, and 1 1/16" diameter holes @ 10" centers for an oil cooler.
Learn More -
Solder on tank set
These tanks have a 1 3/8" diameter hose connection, two 1/4" NC threaded holes in the fan side, two 1/4" NC threaded holes on the grill side, and two mounting pins @ 13" centers. The top tank has a hole for a filler neck, and the bottom tank has a 1/4" NPT flange for a drain.
Learn More