Top and Btm Tank
-
Hino solder-on tank set
Top Tank
This tank has a 2 1/8" diameter hose connection, a 1 1/4" diameter hole for a filler neck, an 18mm flange for a sensor, and two 5/16" NC threaded holes on each end to attach side frames.
Bottom Tank
This tank has a 2 1/8" diameter hose connection, two 5/16" NC threaded holes on each end to attach side frames, and a 1/4" NPT flange for a drain fitting.
Learn More -
Hino solder-on tank set
Top Tank
This tank has a 1 3/4" diameter hose connection, a 1 1/4" hole on top for a filler neck, and an 18mm flange for a sensor.
Bottom Tank
This tank has a 1 3/4" diameter hose connection, and a 1/4" NPT flange for a drain cock. Learn More -
Hino solder-on tank set
Inlet Tank
This tank has a 1 3/4" diameter hose connection, and an air deflector that runs along the side of the tank.
Outlet Tank
This tank has a 1 3/4" diameter hose connection, a seven plate oil cooler with fittings @ 18" centers (718PC), a 5/8" diameter bypass connection, and two 1/4" NPT flanges for drain and expansion fittings.
Note: The oil cooler has 3/4" NPT fittings. The original cooler has quick-connect fittings with an O-ring style seat. Adapters are available at extra cost.
Learn More -
Hino solder-on set
Top Tank
Top tank has a hole in the center of the tank to accommodate a GM filler neck, a 2 1/4" diameter hose connection, an 18mm fitting, and mounting brackets on each end of the tank with a pair of 5/16" NC threaded holes in each for attaching side frames.
Bottom Tank has a 2 1/4" hose connection, a 1/4" NPT flange for a drain cock, and mounting brackets on each end with a pair of 5/16" NC threaded holes for attaching side frames. Learn More -
Hino tank set
Top Tank
This tank has a 2 1/4" diameter hose connection, a 1/4" NPT flange for a 90ohose barb, an 18mm flange for a sensor, a bracket on either end forattaching the side frames, and a hole in the top center for a hoseconnection.
Bottom Tank
This tank has a 2 1/4"diameter hose connection, a 1/4" NPT flange for a drain on the grillside, two mounting blocks, and a bracket on either end for mounting theside frames. Learn More