Solder on Tanks
-
Case 7120 Tractor solder-on tank kit
These tanks have 2 1/4" diameter hose connections and steel brackets on the backs. The top tank has a raised filler neck, and the bottom tank has mounting studs. Various 1/4" NPT flanges for drain/expansion fittings.
Individual tanks #4153-S and #4154-S Learn More -
Case solder-on tank set
Top tank has a 1 3/8" diameter hose connection, and the bottom tank has a 1 1/2" diameter hose connection and a 1/4" NPT flange for a drain. Mounting brackets on each end.
Individual tanks #4163 and #4244.
Learn More -
Case Loader Set - Available in brass (9709) or steel (2104CK)
Top Tank
This tank has a 1 3/4" diameter hose connection (1 3/4" long) 3 3/4" from the edge of the tank to the center of the hose connection, a 1 3/8" diameter pipe facing upward just behind the hose connection to accommodate the fill neck, and four 5/16" NC threaded nuts for the side frames to mount to.
Bottom Tank
This tank has a 2 1/4" diameter hose connection (1 3/4" long) 3 3/4" from the edge of the tank to the center of the hose connection, a 1/4" NPT flange for a drain cock, and four 5/16" NC threaded nuts for the side frames to mount to.
Note: #9709 brass set comes with a #1002 Ford fill neck, and a 1/4" NPT drain cock. With #2104CK steel set the fill neck is sold separately.
Steel Kit #2104CK shown here.
Learn More -
Case solder-on tank kit
These tanks have 1 1/2" diameter hose connections, a 1/4" NPT flange for a drain/expansion fitting, and mounting brackets on each end.
Individual tanks #4207 and #4208.
Learn More -
Case solder-on kit
These tanks have 2" diameter hose connections, steel brackets that run the length of the tanks, and the bottom tank has a 1/4" NPT flange for a drain. Individual tanks #4104 (top), and #4105 (btm).
Learn More -
Case solder-on kit
Both tanks in this kit are identical. They have 1 1/2" diameter hose connections, steel mounting brackets at both ends, and a 1/4" NPT flange for drain/expansion fitting. Individual tank #4136.
Learn More -
John Deere solder-on kit
Top tank has 2 1/4" diameter hose connections and bottom tank is 2 1/2" hose connection, the top tank has a hole for a filler neck, and the bottom tank has a 1/4" NPT flange for a drain on the bottom of the hose connection. Individual tanks #4116 (top), and #4117 (btm).
Learn More -
Case solder-on kit
The top tank has a 1 3/4" diameter hose connection, and a hole for a filler neck. The bottom tank has a 2 1/4" diameter hose connection, and a flange for a drain cock on the bottom of the hose connection, and a steel bracket that runs the length of the tank. Individual tanks #4119 (top), and #4120 (btm).
Learn More -
Case solder-on kit
These tanks have a 1 1/2" diameter hose connection, a mounting bracket on each end, and the top tank has a 1/4" NPT flange for an expansion fitting. Individual tanks #4121 (top), and #4122 (btm).
Learn More -
John Deere solder-on kit
These tanks have 1" diameter hose connections, the top tank has a hole for a filler neck and a steel bracket, and the bottom tank has a flange for a drain cock. Individual tanks #3076 (top), and 3077 (btm).
Learn More