Side Frame
-
New Flyer Bus side frame
#112812A - Side of the frame has four 3/8" NC threaded holes, and five 5/16" NC threaded holes.
#112812B - Side of the frame has five 5/16" NC threaded holes, and the back of the frame has eight 3/8" NC threaded holes.
These frames match with a pair of #042011B tanks.
Learn More -
Orion Bus side frame
This frame has an angle bracket on the back, five 1/4" NC threaded holes along the edge, and four 3/8" NC threaded holes and two 1/4" NC threaded holes along the opposite edge. There are 6 bolt holes on each end.
Learn More -
Orion Bus side frame
This frame has four 3/8" threaded holes along each edge, and four 3/8" threaded holes along the back. There are 6 bolt holes on each end.
Learn More -
Freightliner side frame
This frame has eight slotted holes on one end, eight round holes onother end, and various other holes for brackets, etc. Frames are made to fit either the left or right side foryour convenience. (Early model) Learn More -
Freightliner side frame
These frames are to be used on later model Freightliners with "rounded" headers. They have eight clearance holes drilled for 5/16" bolts on each end, fourteen 1/4" NC threaded holes on each side of the frame, fifteen 1/4" NC holes on the back of the frame, various other clearance holes drilled for 1/2". There is a bracket on the back of the frame with two clearance holes drilled for 1/2" and one hole drilled approximately 1 3/4" dia.
Note: these frames are not interchangeable. Order left for driver's side or right for passenger's side or pairs. Learn More -
Freightliner side frame
This frame is similar to frame #471. It has four 3/8" threaded studs to accommodate a surge tank and mounting bracket. (Late model cross flow rail.) Learn More -
Western Star side frame
Top flange is an "L" shape with 10 holes, two with5/16" N.C. threads and eight drilled clearance for5/16" bolts. Bottom flange has 12 holes, four with5/16" N.C. threads and eight drilled clearance for5/16" bolts. Various other holes for shroud andbrackets, etc.NOTE: Frames are not interchangeable. Order left fordriver's side or right for passenger's side or pairs. Learn More -
Western Star side frame
Same as #520 except longer.
Note: frames are not interchangeable. Order left fordriver's side or right for passenger's side or pairs. Learn More -
Western Star side frame
Top flange overhangs 5 3/8" towards engine with two5/16" N.C. threaded holes on a block that steps up3/16". Top and bottom flanges have 11 holes each, 5tapped 5/16" N.C. and 6 drilled clearance for 5/16"bolts. Various other holes for shroud, brackets, etc.NOTE: Side frame are not interchangeable. Order leftfor driver's side and right for passenger's side or pairs. Learn More -
Western Star side frame
This frame has nine 3/8" NC threaded holes along the back, seven 1/4" threaded holes along the edge to accommodate the shroud, and two notches on the side. The top flange has 12 bolt holes; seven of them threaded @ 5/16" NC, and the bottom flange has 9 bolt holes; four threaded @ 5/16" NC.
LEFT shown here
Note: this frame matches with tank #501 and tank #511
Learn More